Product Overview
The D-984VC is a dedicated VCA control module designed for use with the D-901 Digital Mixer. It expands the D-901 Digital Mixer's functions by 20 VCA control inputs, 8 contact inputs, and 8 contact outputs. By the VCA controls from external equipment, this module permits the D-901's gains of 12 inputs and 8 outputs to be controlled. By the contact input controls from external equipment, this module permits the preset memory recall, input/output channel gains, stereo input selection, and channel ON/OFF to be controlled. By the contact output controls Tally outputs can also be provided for external control.
VCA control (20 channels) + 8 inputs 8 outputs. By the VCA controls from external equipment, this module permits the D-901's gains of 12 inputs and 8 outputs to be controlled. By the contact input controls from external equipment, it permits preset memory recall, gain control, stereo input selection and channel ON/OFF operation plus tally outputs.
Features:
- VCA Control Input: +5V GND, Terminal 1 – 20 (12 input channels, 8 output channels), RJ-45 connecter x 4 Control contents: Volume control of each input/output channel.Variable range: –8dB to +0dB
- Contact Input: COM + terminal 1-8: Open voltage: 5V DC, short-circuit current: 5mA, RJ-45 connector x 2
- Control Preset Memory Selection: Any preset memory can be recalled.Control method: No-voltage make of over 100ms/ No-voltage make single pulse of over 100ms
- Volume Control: Any input/output channel volume can be turned UP or DOWN.Control method: 1 step variation for no-voltage make single pulse of over 100ms 1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break.Variable range; –8dB to +10dB
- Channel: Any input/output channel can be turned ON and OFF.Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100ms
- Stereo Selection: Input channel lines of the D-936R (optional), or the D-937SP(optional) (4stereo input module) can be selected.Control method: No-voltage make of over 100ms/No-voltage make single pulse of over 100ms
- Contact Output: COM + terminal 1-8: No-voltage make contact, contact capacity: 24V DC, 100mA RJ-45 connector x 2
Specifications:
- VCA Control Input: +5 V, GND, Terminal 1 - 20 (12 Input channels, 8 output channels), RJ-45 connector × 4
- Control contents:
- Volume control of each input/output channel
- Variable range: -∞ dB to + 0dB
- Contact Input: COM + Terminal 1 - 8: Open voltage: 5VDC, short-circuit current: 5mA, RJ-45 connector × 2
- Control
- Preset Memory Selection: Any preset memory can be recalled.
- Control method: No-voltage make of over 100ms / No-voltage make single pulse of over 100ms
- Volume Control: Any input/output channel volume can be turned UP or DOWN.
- Control method: 1 step variation for no-voltage make single pulse of over 100ms 1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break.
- Variable Range: -∞ dB to +10dB
- Channel: Any input/output channel can be turned ON and OFF.
- Control method: No-voltage make of over 100ms / No-voltage make single pulse of over 100ms
- Stereo Selection: Input channel lines of the D-936R (optional), or the D-937SP (optional) (4 stereo input module) can be selected.
- Control method: No-voltage make of over 100ms / No-voltage make single pulse of over 100ms
- Contact Output: COM + Terminal 1 - 8: No-voltage make contact, contact capacity: 24VDC, 100mA, RJ45 connector × 2
- Finish:
- Panel: Pre-coated steel plate, black, 30% gloss
- Dimensions: 35 (W) × 119.5 (H) × 178.4mm (D)
- Weight: 170g