Kramer PT-572+ HDMI over Twisted Pair Receiver

The Kramer Pt-572+ is a twisted pair receiver for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twited pair signal back to an HDMI signal.

Features

• Max. Data Rate: 1.65Gbps
• HDTV compatible
• HDCP compliant
• HDMI Support: HDMI (V.1.4 with 3D, Deep COlor, x.v.Color, HDMI umcompressed audio channels, Dolby True HD, DTS-HD)
• 3D pass-through
• DGKat Signal Integration: Kramer's unique technology for converting TMDS as well as control and communications to signals that run over twisted pair cables
• System Range: Up to 90m (295ft) at 1080i,or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft)at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable
• Cable: Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground
• EDIDPassThru: Passes EDID/HDCP signals from source to display
• PowerConnect System: A single connection to the transmitter or the receiver powers the system when the devices are without 270ft of each other

Specifications

• Inputs: 1RJ-45 connector
• Outputs: 1HDMI connector
• Bandwidth:Supports up to 1.65Gbps bandwidth per graphic channel
• Complaincewith HDMI standard: Supports HDMI and HDCP
• PowerSource: 12V DC, 250mA
• Dimensions: 2.4" x 2.1" x 1"