Clear-Com CC-400-X6 Double Ear Headset, 6-pin Male XLR

The CC-400 double-ear headset features high ambient-noise attenuation headphones and a cardioid dynamic microphone that provide high-quality audio. The headset has a flexible design and soft ear pads to offer superior comfort. Able to rotate 300 degrees, the microphone boom acts as an On/Off switch for quick microphone muting, while the C400's dual over-ear design results in a high degree of isolation from outside noise sources. The cable terminates in a 6-pin male XLR connector. 

Clear-Com CC-400-X6 Features

• High quality dynamic cardioid microphone
• High ambient-noise attenuation headphones
• Microphone: 300Hz - 20kHz frequency response
• Headphone: 40Hz - 20kHz frequency response
• Cushioned with soft leatherette padding
• Flexible gooseneck microphone positioning
• 300-degrees boom mic rotation for ON/OFF mic-mute switch
• Rugged design

Specifications

• Headphone
  • Type: Closed-back
  • Driver: 40mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
  • Frequency Response: 40Hz v- 20kHz
• Microphone
  • Element: Dynamic
  • Polar Pattern: Hyper-cardioid
  • Frequency Response: 300Hz - 20kHz
  • Sensitivity
    • Microphone Open Circuit Sensitivity: -61dB ±3.5dB (0dB=1V/1Pa, at 1kHz , typical)
• Headphone Sensitivity
  • CC-300: 102dB ±3dB (SPL) /1mW at 1kHz typical)
  • CC-400: 98dB ±3dB (SPL) /1mW at 1kHz typical)
• Impedance
  • CC-300: 400Ω ±30%; at 1kHz typical
  • CC-400: 200Ω ±30%; at 1kHz typical
  • Microphone: 200Ω ±30%; at 1kHz typical
• Connector
  • Cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR
• Dimensions
  • Packaging for CC-300 and CC-400: 4.8 x 13 x 10.43in (WxHxD) (122 x 330 x 265mm)
• Weight
  • CC-300: 8.6oz (245g) without 8-pin cable assembly and M3*18mm SCREW
  • CC-400: 11.1oz (315g) without 8-pin cable assembly and M3*18mm SCREW