Product Overview
When added to the EasyUSB Mixer/Amp, the EasyTALK Sound Bar offers high-fidelity voice support of far-end audio for any conference application. It can be positioned above or below a flat screen TV or sit freestanding on a desk or credenza. A pair of rubber speaker feet are supplied for tabletop mounting.
Features:
- One (1) EasyTalk Sound Bar (non-powered) for use with EasyUSB Mixer/Amp
- 3.75-inch paper cone woofers for superior dynamic impact
- 0.625-inch aluminum tweeters for superb clarity
Specifications:
- Audio Specifications Frequency Response:
- 20 HZ to 20 kHz
- Dynamic Range: > 90dB
- THD + Noise: < .02%
- Analog Line Input Connector:
- RCA (Unbalanced)
- Impedance: 10Kohm (Unbalanced)
- Nominal Level: -10dBu (Unbalanced)
- Analog Line Output Connector:
- RCA (Unbalanced)
- Impedance: 10Kohm (Unbalanced)
- Nominal Level: -10dBu (Unbalanced)
- Amplifier Connector:
- Two 2-Pin Molex Eurostyle 5.0mm Terminal connectors
- Impendence: 8 ohm
- Amplifier Output: 2X20 Watts
- THD + Noise: < .2% at 1/3 power
- USB Audio Interface Connector: Type-B Female
- Type: USB 2.0 Compliant
- PC Audio Controls: Mute & Volume
- PC HID Controls: On/Off Hook (application dependent)
- EasyMic Ports Connector: Two (2) RJ-45
- Interface: Proprietary
- Max Distance: 100 feet to MicPOD
- Dip Switch Settings 8-Position Dip Switch, Audio Processing - Mixing Modes, Compressor, Filter, Delay, and Updates
- User Indicators Communications Status, Mute, Power
- Power Supply 5.5mm OD x 2.5mm ID Coax Connector
- Supply: 18 VDC, 2.75 Amp, Auto-switching
- Serial Control Protocol:
- RS-232 (external control), 38.4K baud