Product Overview
The Community Distributed Design Series DS5 is a full-range, compact, two-way system that is ideal for installations where space is at a premium. Easily outperforming loudspeakers of a larger size format, the DS5 provides high power handling, high sensitivity and realistic sound reproduction. With a modern architectural appearance that aesthetically merges well in most environments, combined with weather-resistant capability suitable for indirect outdoor use, the DS5 can be used in a wide variety of speech and music applications. It is equipped with a built-in autoformer, allowing the full loudspeaker output to be realized with 70V or 100V distribution lines. A convenient front-accessible power tap switch is hidden behind a rotatable logo. Installation is simple and flexible using the included Infin-A-Ball™ multi-angle wall mounting bracket which allows low profile mounting and precise positioning of the enclosure over a broad tilt-swivel range.
Community DS5 Features:
- Same components and voicing as the Distributed Design ceiling loudspeaker family
- High efficiency, high output, high intelligibility, low distortion
- Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
- Front-accessible power tap switch for selectable 8 Ohm or 70V/100V operation
- Infin-A-Ball™ low profile mounting bracket included
- Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress
Community DS5 Specifications:
- Loudspeaker Type: Two-way, full-range, coaxial surface mount loudspeaker, 8 Ohm or 70V/100V operation
- Operating Range*: 65 Hz - 22 kHz
- Frequency Response*: 80 Hz - 20 kHz (+/- 5.2 dB)
- Max Input Ratings (8 Ohm):
- 100W continuous, 250W program
- 28 volts RMS, 63 volts momentary peak
- Transformer Taps:
- 70V: 60W, 30W, 15W, 7.5W and low impedance
- 100V: 60W, 30W, 15W
- Sensitivity (1W/1m)*:
- 93 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands)
- 91 dB SPL (250 Hz to 4 kHz speech range)
- Maximum Output*: 113 dB SPL / 120 dB SPL (peak 8 Ohm)
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 7.5 Ohms @ 280 Hz
- Nominal Coverage: 130º conical (+47° / -70°, 500 Hz to 6 kHz)
- Axial Q / DI: 4.5 / 6.5, 500 Hz to 6 kHz
- Crossover Frequency: 1.6 kHz
- Recommended Signal Processing: 65 Hz, 24 dB/Oct high pass filter
- Drivers:
- LF: 1x 5" cone
- HF: 1x 1" exit compression driver
- Driver Protection: Self-resetting solid state circuit breaker
- Input Connection: 4-screw Euroblock connector for two pair of 2-wire leads (uninterrupted whether the loudspeaker is connected or not) concealed in the base of the mounting bracket; and a 2-pin Euroblock connector on the loudspeaker enclosure
- Controls: Front-accessible wattage / low impedance selector switch hidden behind the rotatable logo
- Enclosure: ABS plastic, matte finish, paintable
- Mounting/Rigging Provisions: Infin-A-Ball™ mounting system with hidden internal wiring
- Grille: Dual-layer powder coated steel
- Safety Features: Built-in safety cable attachment loop
- Environmental: IP55 rated loudspeakers, IP56 ratedconnector cover, designed to Mil Spec 810
- Required Accessories: Electronic high pass filter
- Supplied Accessories: Infin-A-Ball™ mounting bracket, Hex wrench, Flathead screwdriver
- Optional Accessories: DS-WMP Wall Mount Plate
- Dimensions: 12.9" H x 6.3" W x 7.5" D (328 x 160 x 191 mm)
- Weight (without bracket): 10.3 lbs (4.7 kg)
- Weight (with bracket): 10.8 lbs (4.9 kg)
- *NOTE: On-wall pink noise measurement at 6ft (1.8m) at 10% power; extrapolated to 1 meter and an input of 2.83 volts RMS.