Product Overview
The LP-50-072-01 Advanced Intelligent DSP RF Receiver 6-Pack is the perfect solution for any system where multiple channels are needed. This pack includes six (6) of our LR-5200-072 RF receivers, offering high performance audio in a compact device with best-in-class pickup and reduced noise. Built in rechargeable battery technology makes the LR-5200 an economical and ecofriendly choice, reducing operation and ownership costs while providing extended use. Furthermore, its micro USB connection allows for quick charging as well as easy firmware updates and free iDSP software setup and programming The integrated neck loop and lanyard with DSP loop driver make it a convenient option for listeners with T coil hearing aids, while the OLED display provides at a glance information such as channel status and battery level. Increase your venue's assistive listening availability easily with the LP 50 072 01 Advanced Intelligent DSP RF Receiver 6 Pack!
Listen Technologies LP-50-072-01 Includes:
- 6 x LR-5200-072 receivers
- 6 x LA-430 Ear phone/neck loop lanyard,
- 6 x LA-401 Universal ear speaker,
- 6 x Non-proprietary field replaceable Lithium-ion battery
- 12-unit LA-381 charging tray
- Quick start guide
Listen Technologies LP-50-072-01 Features:
- Includes six (6) high-performance, ultra-sensitive LR-5200-072 receivers, six integrated neck loop/lanyards, six universal ear speakers, and a 12-unit charging tray
- Compact receiver design—the smallest of its kind—makes it easier to wear, dispense, store, and maintain
- Advanced rechargeable battery technology reduces costs and provides long-lasting charge for extended use
- Integrated neck loop and lanyard with DSP loop driver provides an ideal listening experience for users with T-coil-equipped hearing aids
- OLED display offers at-a-glance information including channel status, battery level, volume, and more
Listen Technologies LP-50-072-01 Specifications:
- LR-5200-072
- Frequency Response: 50 Hz - 15 kHz (±3 dB)
- System Distortion: < 2% total harmonic distortion (THD) at 80% deviation
- Output/s: Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm
- System Signal to Noise Ratio: SQ enabled 80 dB, SQ disabled 60 dB
- User Controls: Power, up/down volume, Listen button for end user channel selection
- Programming: Via software and USB port
- Set-up Controls: Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel
- LEDs: Flashes when batteries are low or to indicate charging, solid when fully charged
- Display: Channel designation,battery level, unit number, charging status
- Frequency Range: 72.025 - 75.950 MHz
- Number of Channels: 17 wide band, 40 narrow band
- Sensitivity: .6uV typical, 1 uV maximum for 12 dB sinad
- Frequency Accuracy: ± .005% stability 32 to 122 ºF (0 to 50 ºC)
- Squelch: Programmable in 20 steps, automatic on loss of RF signal
- Antenna Type: Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable
- Power Supply: Micro USB connector, 5 V, 500 mA
- Battery Type: Lithium Ion 3.7 Vdc, 1200 mAh
- Battery Life: 8 Hours of continuous use
- Battery Charging Time: Fully charged in 2.5 Hours
- Color: Black
- Unit Weight with Batteries: 2.40 oz. (68 g)
- Shipping Weight: 3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum
- Dimensions (H x W x D): 3.75 x 2.0 x 0.64 in. (9.6 x 5.0 x 1.7 cm)
- Unit Weight: 1.60 oz. (45 g)
- Dimensions with Belt Clip: 3.75 x 2.0 x 0.80 in. (9.6 x 5.0 x 2.1 cm)
- Temperature - Operation: 14 to 104 ºF (-10 to 40 ºC)
- Temperature - Storage: (-)4 to 122 °F (-20 to 50 °C)
- Relative Humidity: 0 to 95% relative humidity, non-condensing
- Standards: FCC Part 15, Part 90, Industry Canada, RoHS
