Newer Tech NWTU3S3HD USB3 Super Speed Drive Dock

NewerTech Voyager SATA drive docking solutions support all 2.5" & 3.5" SATA 6Gb/s, 3Gb/s & 1.5Gb/s drives up to 4.0TB.

Whether you're on a data recovery mission or just want to check the contents of an older swapped out drive, NewerTech Voyager is the easiest, most convenient way to access data from any Serial ATA (SATA) drive. Just insert any standard 2.5" or 3.5" SATA I/II/III drive with up to 4.0TB capacity into the compact docking base and select one of the four interfaces supported by your Mac® or PC for the fastest data transfer performance. Then, start reading and/or writing data to the docked drive. There's nothing else to install or configure!

With its Plug and Play design, the NewerTech Voyager saves you the time of installing a drive into a computer or the cost of an external enclosure. Now you can think of bare SATA drives with the same convenience and instant access benefits as flash memory cards…but with huge gains in storage capacity!

Have multiple drives you need to access? No problem, NewerTech Voyager's unique design makes hot-swapping SATA drives a breeze*. When finished using your drive, simply pull up on it or use the eject lever for 3.5" drives for quick and effortless removal.

Instead of needing multiple enclosures and power supplies for every archived drive, NewerTech Voyager makes accessing your valuable data a breeze. Just slide in your drive, find the desired image or clip, and then return the drive to your storage safe.

With all supported interface connector cables included, an auto-switching power supply for worldwide compatibility, and flexible operating system compatibility, the NewerTech Voyager can travel your data universe with ease.

Newer Tech NWTU3S3HD Features:

• Supports all all 2.5" and 3.5" SATA I/II/III drives and SSD drives up to 4.0TB
• Multi-Interface for maximum data transfer rates and system compatibility
• Data transfer rates up to 5.0Gb/s (500MB/s)
• Push button drive eject for safe removal
• Hot-Swap functionality for fast access of multiple SATA drives
• Weighted base and non skid rubber feet for stable operation
• 2-Color Status LED:
  • Left side Blue = Power
  • Right side Flashing Red = Disk Activity
• Compact design...measures 5.28" x 3.70" x 2.68" inches
• Whisper Quiet operation…no cooling fan needed
• Plug and Play with Macs and PCs
• All interface connection cables included
• RoHS Compliant
• 1 Year NewerTech Enclosure Limited Warranty with48-Hour Turnaround Time Register Here
• CE approved
• Transfer Rates:
  • USB 3.0: up to 5.0Gb/s (500MB/s)
  • eSATA: up to 3.0Gb/s (or 300MB/s)
  • FireWire 800: up to 800Mbps (100MB/s)
  • FireWire 400: up to 400Mbps (50MB/s)

Newer Tech NWTU3S3HD Specifications:

• Supports:
  • Serial ATA 1.5G/3G/6G (SATA I/II/III) Drives of 2.5" and 3.5" types and up to 4.0TB.
  • Note: Voyager only accepts SATA interface drives (show connector) If you have IDE/ATA interface drives (show IDE), they recommend the NewerTech USB Universal Drive Adapters.
• Port/Interface Bootability:
  • USB 3.0: Supported on Macs and PC's meeting minimum requirements.
  • USB 2.0: Supported on Macs and PC's meeting minimum requirements.
• Bridge Chipset: ASMedia 1051e
• Interface/Ports: (1) USB 3.0 port, fully backward compatible with USB 2.0
• Maximum Data Transfer Rate: USB 3.0 SuperSpeed 5Gb/s, up to 500MB/s
• Macintosh Requirements:
  • Macintosh OS 8.6 to 9.2.2, OS X 10.2.x or later, and an available USB 3.0/2.0 port. Support for drives over 2TB requires Mac OS X 10.2 and later.
• Windows Requirements:
  • Windows 7, Vista, XP, 2000, NT, 98, and an available USB 3.0/2.0 port. Support for drives over 2TB requires Windows XP 64-bit and later.
• Linux Requirements:
  • Linux compatible via supported the USB interface.
• Power Supply: UL Listed U.S./International AutoSwitching 100 ~ 240v, 50/60Hz input, 12 Volt 3 Amp output Power Supply(adapter plugs for International use sold separately).
• Weighted Base Material: ABS black plastic with non-skid rubber feet
• Dimensions:
  • 5.28" x 3.70" x 2.68" (W x D x H)
  • 134.11mm x 93.98mm x 68.07mm
• Weight: 1.35 lbs. (.61kg) (without drive)
• Warranty: 1 Year Newer Tech Enclosure Limited Warranty

Note:

Use of eSATA interface requires system reboot in order to recognize drive. For FireWire 800 users, OWC recommends that the Voyager be the only device connected or the last device in the chain when hot-swapping drives. If you have other devices behind the Voyager, not all devices will remount after a drive is swapped. When that occurs, a power-cycle is needed for that device. For eSATA users, a system reboot is required in order to recognize drive.