Product Overview
The Martin Professional MAC Aura XB takes an innovative, compact LED wash light to the next level, incorporating many features first introduced with the MAC Quantum Wash™. Not only does the MAC Aura XB offer additional brightness, it also features a superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effects™ are also part of the package.
Martin Professional MAC Aura XB Features:
- Super-bright single lens wash with fully premixed color
- Compact design and low weight (6.5 kg)
- High efficiency, low power consumption, long service life
- Broad color palette, RGBW color mixing
- Eye-candy Aura Effects™
- Uniform shades
- Built-in FX engine
- 10 to 60° uniform zoom
- 6000 Lumens output
- Rapid movement
Martin Professional MAC Aura XB Specifications:
- Optics and Photometric Data:
- Light source: 15 W RGBW array system
- LED refresh rate: Beam 1200 Hz, Aura 4395 Hz
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- *Figure obtained under manufacturer´s test conditions
- Total luminous output (wide, one-tenth peak): 6.0 Klm
- Total luminous output (narrow, one-tenth peak): 4.3 Klm
- Video compatibility: Designed for use with HD/high-speed video cameras
- Physical:
- Dimensions (LxWxH): 11.9" (across yoke) x 11.9" (across yoke) x 14.2" (head straight up) (302 x 302 x 360 mm)
- Weight: 14.4 lbs (6.5 kg) without accessories
- Dynamic Effects:
- Beam color mixing: RGBW
- Aura (secondary lens array illumination) color mixing: RGB
- Beam color temperature control: CTO, variable 10 000 - 2500 K
- Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
- Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
- Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable
- Electronic dimming: Independent beam and aura, four dimming curve options
- Zoom: 10° - 60° (one-tenth peak angle)
- Pan: 540°
- Tilt: 232°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
- Control and Programming:
- Control options: Independent or synchronized Beam and Aura control
- Control system: DMX, RDM
- Control resolution: 8-bit, with 16-bit control of pan & tilt
- DMX channels: 14/25
- Setting and addressing: Control panel with backlit graphic display
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Transceiver: RS-485
- Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
- Construction:
- Color: Black
- Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
- Protection rating: IP20
- Installation:
- Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
- Orientation: Any
- Minimum distance to combustible materials: 200 mm (8 in.) from fixture
- Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
- Location: Indoor use only, must be fastened to surface orstructure
- Connections:
- AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket AC power input socket accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector AC power thru socket accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
- DMX data in/out: 5-pin locking XLR
- Electrical:
- Maximum power consumption: 400 W
- Power supply unit: Auto-ranging electronic switch mode
- AC power: 100-240 V nominal, 50/60 Hz
- Typical half-cycle RMS inrush current: 10.7 A
- Power consumption, all effects static, zero light output::
- Typical Power and Current:
- 100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
- 120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
- 208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
- 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
- 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
- Thermal:
- Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
- Approvals:
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
- EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA E598-2-17 (CSA E60598-1)
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
- Included Items: M12 bolt suitable for use with Martin rigging clamps
- Related Items:
- Martin USB Duo™ DMX Interface Box: P/N 90703010
- Martin DMX 5.3 Splitter™: P/N 90758140
- Martin RDM 5.5 Splitter™: P/N 90758150
Note:
power cables and connectors are not included and must be ordered separately