Kupo KG200912 Grip Arm Support with 360° Rotation

Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.

Today Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp, and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360° for infinite flexibility and extends from 22"-30.7" (56cm-78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.

Kupo KG200912 Grip Arm Support Specifications:

• Length: 22.88" (58.1 cm)
• Width: 2.43" (6.18 cm)
• Height: 1.48" (3.75 cm)
• Weight: 1.1 lbs (0.5 kg)
• Risers: 1
• Sections: 2
• Primary Material: Aluminum
• Secondary Material: Stainless Steel Bolts
• Minimum Jaw Diameter: 0.08" (2 mm)
• Maximum Jaw Diameter: 0.63" (16 mm)