Product Overview
The Shure BLX14R/SM35 Headworn Wireless System is part of the Headworn wireless systems family.
Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
Includes
- BLX1 Bodypack Transmitter
- BLX4R Rack Mount Receiver
- SM35 Performance Headset Condenser
- Rack Mounting Kit
- Thread Adapter
- (2) 1/4 Wave BNC Antennas
- (2) BNC Bulkhead Adapters
- Zippered vinyl bag
- (2) 22 in. BNC Cables
- Power supply
Features
- BLX4R Receiver
- XLR and 1/4" output connectors
- Microprocessor-controlled internal antenna diversity
- Two-color audio status indicator LED
- Green: Normal audio levels
- Red: Excessive audio levels (overload / clipping)
- Adjustable output level
- LCD display with detailed RF and audio metering
- BLX1 Bodypack Transmitter
- Quick and easy receiver frequency matching
- TQG connection for use with Shure lavalier, headset,earset and instrument microphones and guitar cables
- Easily accessible On / Off switch
- Up to 14 hours of continuous use with 2 AA batteries
- 300 ft (100 m) transmission radius
- SM35 Headset Microphone
- Wireframe headset fits securely and comfortably foractive performers and multi-instrumentalists
- Tight, unidirectional cardioid polar pattern rejectssignal bleed and feedback for use on loud stages and behind floor monitors
- Flexible gooseneck design allows for optimizedplacement that further improves source isolation
- Lightweight and low-profile form enables comfortable,long-wearing use
- TA4F (TQG) connector is compatible with any Shurewireless bodypack
- Locking snap-fit windscreens tame plosives, breath,and wind noise for clean and intelligible sound
- Tailored frequency response refined for clear, crispvocal reproduction
- Included in BLX and GLX-D® wireless systems, renownedfor their ease of use and reliable performance
- Legendary Shure precision engineering for durability and performance
Specifications
- BLX-R System
- Working Range: 91 m (300 ft) Line of Sight (actual range depends on RF signal absorption, reflection and interference)
- Audio Frequency Response: 50 to 15,000 Hz (dependent on microphone type)
- Total Harmonic Distortion, Ref. ±33 kHz deviation with 1 kHz tone: 0.5%, typical
- Dynamic Range: 100 dB, A-weighted, typical
- Operating Temperature: -18°C (0°F) to 57°C (135°F) (battery characteristics may limit this range)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
- BLX1 Bodypack Transmitter
- Audio Input Level
- max: -16 dBV maximum
- min (0 dB): +10 dBV maximum
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 MΩ
- RF Transmitter Output: 10 mW, typical (varies by region)
- Dimensions (H x W x D): 4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm)
- Weight: 2.6 oz. (75 g), without batteries
- Housing: Molded ABS
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
- BLX4R Rack-mount Receiver
- Output Impedance
- XLR connector: 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
- Audio Output Level, Ref. ±33 kHz deviation with 1 kHz tone
- XLR connector: –20.5 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load)
- RF Sensitivity: -105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions (H x W x D): 1.65 in. X 7.80 in.X 6.42 in. (42 mm X 198 mm X 163 mm)
- Weight, without antennas: 2.2 lbs (998 g)
- Housing: Molded ABS, steel
- Power Requirements: 12–15 V DC @ 260 mA, supplied by external power supply (tip positive)
- SM35 Headset Microphone
- Type: Electret Condenser
- Frequency Response: 40 – 20,000 Hz
- Polar Pattern: Cardioid