Product Overview
The ETC 7050A1001 D15 Standard Dimmer Module is designed for use in both Sensor®+ and Unison® Dimming Series modular rack enclosures. Standard Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. The patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.
Applications:
- Incandescent lighting
- Low voltage lighting
- Quartz lighting
- Neon lighting
- Cold Cathode lighting
- 2-wire Fluorescent ballast
- 4-wire Fluorescent ballast
ETC D15 Features:
- Two 1.8 or 2.4kW dimmers per module
- Standard or Enhanced risetime toroidal filters
- High-density modular assembly
- Die-cast aluminum chassis
- Fully magnetic circuit breakers
ETC D15 Specifications:
- Physical:
- Modular plug-in assemblies
- Cast aluminum chassis, finished with textured epoxy paint
- Keyed to prevent insertion in inappropriately rated rack positions
- Circuit Breakers:
- Fully magnetic to eliminate nuisance tripping
- 20x inrush current rating
- 125%, 10-120 seconds, must-trip rating
- Rated for 100% switching duty applications
- Ratings:
- 100,000A Short Circuit Current Rating Rating (SCCR)
- Modules withstand hot-patching of cold loads up to full rating
- UL and cUL LISTED
- Power Device:
- Sealed, patented assembly
- Field replaceable with screwdriver
- Two back-to-back SCRs per circuit
- One control LED per circuit
- Integral bonded heatsink
- Integral temperature sensor
- Filtering:
- High quality toroidal filters: 350µS risetime - Standard 100-120V modules
- * Risetime measured at full load, at worst case firing angle (90°), from 10-90% of output wave form
- Dimmer Range:
- Incandescent, low voltage dimming range 100-0%
- Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification
- Sizing of Neon transformer used in dimming applications should be 1.5x greater than size used in non-dimming application