Rosco Flamex NF 5 Gallon Container of Flame Retardant for Natural Fibers

Rosco flamex NF is intended for use on natural fiber fabrics, which is commonly used in scenery or costumes. This liquid flame retardant is easy to use, with no greasy after effects, making Roscoflamex NF one of the best solutions for insuring your scenery and props meet local fire regulations. This clear liquid can be use right out of the bottle and applied by dipping (the most efficient method, immerse completely for ten minutes), brushing (via a criss-cross pattern), or spraying (use a Hudson-type sprayer with a medium nozzle setting for best results.)

Use Rosco flamex NF to effectively treat:

• Cotton
• Muslin
• Scrims
• Cotton netting
• Natural velours
• Wools
• Linens
• Natural felts
• Decorative, garment or upholstery fabrics made from natural fibers

NOTE: DO NOT COMBINE OLD FLAMEX PRODUCTS WITH NEW FLAMEX PRODUCTS!

Rosco flamex NF Features:

• Pre mixed, do not dilute
• No oily residue
• Very low odor
• Less likely to bleed through backdrops
• Registered with CA & NYC Fire Marshall

Rosco flamex NF Specifications:

• Product Number: 150 079NF 0640
• Title: Roscoflamex NF Natural Fiber
• Ammount: 5 Gallon (18.95L)
• Mix Ratio: Use straight out of the bottle
• Appearance: Clear liquid that dries clear
• Coverage: Treats approximately 500 square feet (46.4square meters) of fabric / per gallon
• Drying: Allow to dry naturally or using forced hot air
• Composition: Water soluble inorganic salts
• Safe for professional use
• Certification and Testing: Roscoflamex NF has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701
• Storage: Store Flamex products in non-metallic containers. When metal sprayers are used, they should be thoroughly cleaned immediately after use, including nozzles and accessories. Avoid use of metal buckets or paint containers when possible.
• NOTE: Read carefully the instructions supplied with any Flamex product. Rosco offers these products in good faith, but without guarantee of any type, since materials treated and methods of application are beyond the control of the manufacturer. You should determine suitability of the Flamex product for the intended use and always test before using.