Product Overview
Liberty AV Solutions' Intelex DIGI-HDXL-R receiver extends HDMI over a single cable by using HDBaseT technology. The DIGI-HDXL-R supports 1080p video signals up to 150 meters (492 feet) including multichannel audio. Flexible power design allows the DIGI-HDXL series extenders to be powered at either the TX or RX end, and only one power supply is required.
Applications:
- Extension of HDMI and control signals up to 150 meters
- Limited access to power for extenders on both ends
- Ideal for digital signage, home theater, commercial video systems
Liberty AV Solutions DIGI-HDXL-R Intelix Receiver Features:
- HDMI transmission up to 150m (492 ft)
- Two-port Ethernet switch; locking power connector
- Supports 1080p/24bit and audio formats up to 7.1 audio
- Supports HDBaseT, CEC specifications; HDMI/HDCP compliant
- Built-in surge protection, diagnostic LEDs
- Bidirectional Wideband IR, RS232 and 100BaseT Ethernet pass-through
- PoE (Power over Ethernet) - power from TX (PS not included) when used with DIGI-HDXL-S
Liberty AV Solutions DIGI-HDXL-R Intelix Receiver Specifications:
- Input/Output Connections:
- HDMI Output: One HDMI Type A Receptacle Connector
- Twisted Pair (HDBaseT): One Shielded RJ45 Female
- RS232: One 3-Pole Euroblock connector
- Ethernet: Two Shielded RJ45 Female
- IR Input: One 3.5mm TRS
- IR Output: One 3.5mm TS
- 24V DC Power: One 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel
- Supported Audio, Video, and Control:
- Maximum Video Compatibility: Deep Color 24 Bit at 1080p
- Video Compliance: HDMI, HDCP, and CEC (Consumer Electronics Control)
- Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
- Input DDC Signal: 5.0 volts p-p (TTL)
- Input Video Signal: 0.5 to 1.0 volts p-p
- IR Carrier Frequency Range: 33-55kHz at 5 volts
- Ethernet: 100BaseT
- RS232 Baud Rate: Up to 115200 baud
- HDBaseT Signal Characteristics:
- Maximum Distance: 150 m (492 ft)
- Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
- Gain: 0 dB – 10 dB at 100 MHz
- Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 100 m
- Return Loss: < -30 dB at 5 KHz
- Total Harmonic Distortion (THD): < 0.005% at 1 KHz
- Min-Max Signal Level: < 0.3 V – 1.45 Vp-p
- Differential Phase Error: ±10° at 135 MHz over 100 m
- Chassis and Environmental:
- Enclosure: Painted steel
- Dimensions: 3.35" x 5.94" x 0.95" (85 x 151 x 24 mm)
- Shipping Weight: 1.1 lbs. (0.5 kg)
- Operating Temperature (Environment): 32°-104°F (0°-40°C)
- Operating Temperature (Chassis):
- 88°F (31°C) (S)
- 100°F (38°C) (R)
- Operating Humidity (Environment): 20% to 90%, Non-condensing
- Storage Temperature (Environment): 14°-140°F (-10°-60°C)
- Storage Humidity (Environment): 20% to 90%, Non-condensing
- Power, ESD, Regulatory:
- PoE Standard (Twisted Pair [HDBaseT] port) to extender: 802.3af
- Maximum Power Consumption: 22 watts
- Power Supply (Not Included): 24vDC / 1.5 Amp
- ESD Protection: 15kV
- Regulatory: CE, RoHS
- Other:
- Standard Warranty: 2 years
- Diagnostic Indicators: Heartbeat, Link, HDMI, and power LEDs
- Included Accessories: Installation Guide
- Compatible Transmitters (AV and Control): FLX-BO4A-XL
- Compatible Transmitters (AV, PoE and Control): DIGI-HDXL-S
NOTE:
This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.