Audix M3GHM MIC, TRI-ELEMENT, HANGING HD MNT GREY

Aesthetics and quality meet in the M3 Tri-element hanging microphone system. This innovative audio solution incorporates three phase coherent hypercardioid capsules with tailored frequency responses, ideal for environments where speech clarity is critical. Break through undesired noise in meeting rooms and classroom—the M3's low noise preamp circuitry creates studio quality sound with the highest possible signal to noise ratio, while high quality silicone jacketed microphone cable maintains a balanced, shielded signal. Adjustable cable and the low impedance design allow for optimized installation and usability from video conferencing to courtrooms and medical facilities.

M3GHM installs in ceilings without drop tile, featuring a 4" x 4" mounting plate. Easily install with plenum rated junction box JBM3 and connect input to a mixer or dsp console via breakout cable CABLM3TERM or a variety of shielded CBLM3 CAT 7 cables available in lengths up to 325 ft.

Includes

• Charcoal Grey Microphone
• 6 ft. Charcoal Grey Cable
• Plenum Rated Junction Box
• Breakout Cable
  • RJ45 Connector
  • Three Block Terminals
• One Mounting Plate, 4" x 4"

Features

• 100% RF shielding and gold diaphragm condenser capsules
• Very high output, low self-noise
• Evenly dispersed sound with undetectable phase
• Adjustable length silicone jackets microphone cable
• Easy to install with Ceiling Mounting Plate, JBM3, and CBLM3TERM

Specifications

• Transducer Type: Pre-Polarized Condenser
• Frequency Response: 30 Hz – 19 kHz
• Optimized Response: 70 Hz – 9 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 150 Ohms balanced
• Sensitivity: 34 mV / Pa @ 1k
• Off Axis Rejection:
  • 1 capsule >23 dB at 180º relative to 0º
  • 2 capsules >18 dB at 120º
  • 3 capsules >9 dB at 60º
• Signal/Noise Ratio (A-weighted): 72 dB
• Equivalent Noise Level (A-weighted): 22 dB (A weighted)
• Maximum SPL @ .5% THD: ≥128 dB
• Dynamic Range: 106 dB
• Power Requirements: 18 – 52 Volts phantom
• Cable/Connector: Terminal block or XLR
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Dimensions: 2" diameter x 1.2" width
• Weight: 3.32 oz.
• *TAA compliant