DPA MMP-F120 122cm (48") Modular Active Boom

DPA Microphones' MMP-F120 is a Modular Active Microphone Boom designed for lectern or even stylish floor-stand applications. It's part of their d:sign™ MMP-F preamplifier series, available in different lengths and gooseneck choices. This particular model features a boom pole length of 120cm (47-¼ inches).

It comes equipped with a state-of-the-art preamplifier design along with a sleek appearance, and offers you the ability to combine this preamp with any modular capsule in the d:dicate™ Microphones Series. Its exceptional radio-frequency rejection is achieved via DPA-designed impedance-balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can all be ordered at a custom fee charge—please contact your Sales Pro for further details.

Specifications

• Output connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Low-cut frequency, -3 dB: 15 Hz
• Noise with shorted input A-weighted: 0.6 µV
• Output voltage, RMS: 2.2V
• Output voltage, peak: 3.1V
• Type of electronic circuit: Active
• THD@1VRMS, 1 kHz: < 0.2 %
• Dynamic range: 131 dB
• Output impedance: 100 Ω
• Minimum load impedance: 2 kΩ
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing
• Common mode rejection ratio (CMRR): > 40 dB
• Power supply (for full performance): 48 V Phantom power (± 4 V)
• Current consumption: 3.5 mA
• Color: Matte Black
• Dimensions (Ø x L): 0.75" x 47-¼" (19mm x 120cm)
• Temperature range: -40 °F to 113 °F (-40 °C to 45 °C)
• Relative humidity (RH): Up to 90%