Product Overview
The NKE6S-2-WOC from Neutrik is a 2m-long preassembled ethercon CAT6 patch cable. It's a shielded S/FTP cable with a cable plug carrier that has a robust metal shell and Push-Pull locking system (note: This particular configuration comes with a cable plug carrier on a single cable end ONLY).
*Notes:
- This product intermates ONLY with NE8FDY-C6x Cat 6 receptacles.
- Not compatible with CAT5 and CAT6A chassis connectors.
Features
- CAT6 compliant - data rate up to 10 GBit/s
- CAT6 performance - fast data transmission and high bandwidth applications
- CAT6 specifications according TIA / EIA 568B, ISO / IEC 11801, EN 50173
- IP65 - Dust and waterproof in mated condition
- Shielded system - high noise immunity and EMI protection
- Push Pull mating - secure and proven locking system
- Ready made patch cables with rugged cable carrier and unique chuck-type strain-relief
Specifications
- General:
- Electrical:
- Contact resistance: < 10 mΩ
- Dielectric strength: 1 kVdc
- Frequencyrange: 1 - 250 MHz
- Insulation resistance: = 0.5 GΩ
- Rated current per contact: 1.5 A
- Rated voltage: < 50 V
- Mechanical:
- Insertion force: = 40 N
- Withdrawal force: = 20 N
- Lifetime: > 1000 mating cycles
- Wiresize: 8 x AWG 27/7 mm²
- Locking device: Push-Pull
- Materials:
- Boot: Polyurethan
- Contact plating: 0.7 µm Au over 1.2 µm Ni plating
- Contacts: Bronze (CuSn8)
- Insert: Polyamide (PA 6.6 30 % GR)
- Shell: Zinc diecast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: Polyacetal (POM)
- Environmental:
- Flammability: UL 94 HB
- Standard compliance: CAT6, Class E acc. TIA/EIA 586B, IEC11801, EN 50173
- Protection class: IP65
- Temperature range: -10 °C to +60 °C