Audio-Technica ATM350S Cardioid Condenser Instrument Microphone

Featuring a low-profile mic design for minimum visibility the Audio-Technica ATM350S Cardioid Condenser Surface Mount System improves the isolation of your desired sound source. The surface mount attaches permanently or temporarily to an accordion or other instrument that is difficult to mic, providing excellent shock resistance for the microphone. And the rugged 5" gooseneck rigidly holds its shape, keeping the microphone accurately positioned even during aggressive play.

The ATM350S also has an in-line power module that is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise. All of the ATM350S positive qualities result in crisp, clear, well-balanced microphone response, even at high SPLs.

Includes:

• ATM350a cardioid condenser microphone
• AT8543 power module
• AT8491S UniMount® surface mount
• AT8475 surface mounting kit
• AT8490 UniMount® 5" gooseneck
• AT8468 violin mount (hook-and-loop fastener); protective carrying case

Features:

• Low-profile mic design for minimum visibility
• Crisp, clear, well-balanced microphone response, even at high SPLs
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• UniMount® surface mount attaches permanently or temporarily to an accordion or other instrument that is difficult to mike, providing excellent shock resistance for the microphone
• Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
• In-line power module is equipped with a switchable 80Hz high-pass filter to control undesired ambient noise
• Interchangeable elements available for hypercardioid and omnidirectional polar patterns
• Included violin mount with hook-and-loop fastener provides an additional mounting option

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 40 – 20,000Hz
• Low Frequency Roll-Off: 80Hz, 12dB/octave
• Open Circuit Sensitivity: –49dB (3.5mV) re 1V @ 1Pa
• IMPEDANCE: 200Ω
• Max Input Sound Level: 159dB SPL, 1kHz @ 1% T.H.D.
• Dynamic Range (typical): 130dB, 1kHz @ Max SPL
• Signal-To-Noise Ratio: 65dB, 1kHz @ 1Pa
• Phantom Power Requirements: 11– 52VDC, 3.5mA typical
• Switch: Flat, roll-off
• Weight (MIc): 14.5g (0.5oz)
• Weight (Power Module): 90g (3.2oz)
• Dimensions (Mic):
  • 37.8mm (1.49'') long,
  • 12.2mm (0.48'') maximum body diameter
• Dimensions (Power Module):
  • 92mm (3.62") long,
  • 18.9mm (0.74") diameter
• Output Connector (Power Module): Integral 3-pin XLRM-type
• Cable:
  • 4.0m (13.1') long (permanently attached to microphone),
  • 3.2mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
• Optional Interchangeable Elements:
• UE-H hypercardioid (100°)
• UE-O omnidirectional (360°)

Notes

Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.