Product Overview
This member of LynTec's XPC XTEND Power Contol Series is the XRS 80 Vertical Rack Sequencer, which is a hardwired vertical rack-mounted strip, managing up to four 20-amp circuits for powering four corresponding duplexes, each with dedicated switch for onboard control.
This microcontroller is a based power distribution device that can be accessed via Internet or intranet communications using an Ethernet connection. With this remote access, individual AC circuits can be turned on and off and AC power receptacles can be monitored for electrical current flow.
Features
- Integrate XPC-powered components via the RPC, RPCR and NPAC or the XPC standalone controller
- Mount anywhere and connect via your network
- Built-in web server with browser interface
- Set-up, control and monitor via smartphone, tablet or computer
- Easily add components to an existing LynTec system
- Place Xtend modules anywhere there’s a circuit
- Power and control components at the equipment location
Specifications
- Chassis: 16 Gauge Steel
- Dimensions (L x W x D): 32” x 3.5” x 2”
- Relay current rating: Four @ 30A
- Number of circuits: Four @20A
- Number of controlled Pods: Four (one per circuit)
- Power input: 4’ external wire harness (4 line, 4 neutral, 1 ground)
- Power Output: Four NEMA 5/20R Duplex
- Input Voltage: 120 VAC @60Hz
- Communications input: Ethernet (RJ-45, 8-wire)
- Communications Protocol: HTML
- Front Panel Monitor: LED indicates network connection
- Front Panel Control: Override switch to turn on in event of product or network fault
- Standards: UL508A
Safety Notes
- The XRS-80 is designed to operate at 120 volts, 60 hertz. Operation with any voltage or frequency other than that can damage the equipment and create an unsafe situation.
- CAUTION #1: This device must be grounded.
- CAUTION #2: This device should be installed only by qualified electrical technicians using appropriate mounting hardware and correct installation techniques. Before installing make sure main power is off.
- CAUTION #3: Do not expose this product to moisture or salty air. Doing so could cause significant damage and create an unsafe condition.