Tascam MX-8A 8-In / 8-Out Matrix Mixer with DSP, Euroblock Connection

From shops and restaurants to hotels and event centers, MX-8A from Tascam is a Matrix Mixer equipped to optimize audio in environments where it is needed most. Equipped with 8 mic/line inputs and 8 line outputs, MX-8A is also integrated with Euroblock connectors and DSP functionality for audio optimization and custom configuration. Mix mic and playback equipment audio signals in 8 different zones, ideal for implementation in small-to-medium scale structures. Onboard DSP provides a full set of audio processing inputs, including Compressor, 4 parametric EQ, auto level, and ducking, while line level outputs delivers 10 band EQ, high pass filters, low pass filters, delay and limiter effects. Control is easy with two custom control apps, Tascam MX Connect and Tascom EZ Connect, both manageable directly from your Windows / mac OS / Android / iOS device. A variety of settings and configuration are at your fingertips with MX-8A.

Includes

• Power cord × 1
• Euroblock plug × 16
• Cable band kit × 1
• Rackmount screw kit × 1
• Owner's Manual (including warranty) × 1

Features

• 8-channel mic / line input with phantom power (+48v) support and 8 line output
• Equipped with Euroblock connectors for signal input / output
• Compatible with external software (Windows / macOS / Android / iOS) for audio playback / recording via USB audio interface function
• Includes a variety of DSP functions for optimal use in different scenes / environments
• Flexible scene preset function allows recall of a variety of configurations (Up to 50 presets)
• Timer event function allows to automatically switch scenes at a specified times

Specifications

• Power: AC100-240 V, 50/60 Hz
• Power consumption: 21W
• Operating temperature range 0～40°C
• Format: 44.1k / 48k Hz, 16bit / 24bit
• Ethernet
  • Connector: RJ-45
  • Transmission protocol: TCP/IP
  • Ethernet standard: 100BASE-TX
  • Cables: Category 5e or faster STP cables
• USB
  • Connector: 4-pin USB B-type
  • Transfer rate: USB2.0 High Speed (480Mbps)
• Analog In
  • Minimum input level: -70dBu
  • Connector: Euroblock (Balanced) 3.81mm pitch
  • Maximum input level:
    • MIC: +26dBu
    • LINE: +24dBu
  • Input impedance: 2.2kΩ or higher
• Analog Out
  • Connector: Euroblock (Balanced) 3.81mm pitch
  • Nominal output level +4dBu (when Ref.Level set to other than -9dBFS)
  • +6dBu (when Ref.Level set to -9dBFS)
  • Maximum output level
    • (switchable): +15dBu (Ref.Level: -9dBFS)
    • +18dBu (Ref.Level: -14dBFS)
    • +20dBu (Ref.Level: -16dBFS)
    • +22dBu (Ref.Level: -18dBFS)
    • +24dBu (Ref.Level: -20dBFS)
  • Output impedance: 200Ω or lower
• RS-232C Connector: D-sub 9-pin (female, inch-standard)
• RS-485 Connector: RJ-45
• Cables: Category 5e or faster STP cable