Product Overview
The Electro-Voice RE3-BPCL, a next-generation UHF wireless microphone set that comes with an RE3 Bodypack transmitter with CL3 Cardioid lav microphone and your choice from 3 operating frequency bandwidths for use in the North American market,
Includes
- CL3 Cardioid Lavalier Microphone
- RE3-BPT Bodypack Transmitter
- RE3-RX Diversity Receiver
- (2) Receiver antennas
- Universal power supply
- (2) AA batteries
- Receiver rack mounting hardware
Features
- CL3 Cardioid Lavalier Microphone
- Ideal for general sound reinforcement and presentations
- Cardioid polar pattern rejects ambient sounds and increases gain before feedback
- Delivers full and accurate sound
- Wide dynamic range and frequency response
- Clothing clip holds microphone securely and attaches easily to garments
- RE3-BPT Bodypack Transmitter
- Robust metal body
- Up to 36 MHz tuning bandwidth (band specific)
- Selectable low and high output power (band specific)
- Unique magnetic latch and lock for easy access to batteries
- Sync function for easy frequency setup
- RE3-RX Diversity Receiver
- Diversity reception minimizes dropouts
- Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation
- Easy-to-read LCD display
- Frequency scanning for selecting open frequencies
- Sync function links transmitter to receiver for easy setup
Specifications
- CL3 Cardioid Lavalier Microphone
- Element type: Self-biased condenser
- Frequency response: 100 Hz - 15 kHz
- Polar pattern: Cardioid
- Sensitivity, open circuit voltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
- Maximum SPL: 115 dB SPL
- Impedance: 3700 ohms
- Power requirements: 3-9 VDC
- Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
- Electrical contact pinouts:
- Pin #1 - Ground, shield
- Pin #2 - Audio
- Pin #3 - Bias voltage
- Pin #4 - N/C
- Dimensions (cable length): 56.3" (1430 mm)
- Dimensions (head length): 1.04" (26.4 mm)
- Dimensions (head diameter): 0.4" (10.1 mm)
- Net weight: 0.758 oz (21.5 g)
- Shipping weight: 6.35 oz (180 g)
- Microphone connector: 4-pin mini plug
- Head finish: Non-reflecting black
- Material: Die cast aluminum, steel wire cloth grille, black flexible PVC cable
- RE3-BPT Bodypack Transmitter
- Frequency oscillation mode: Phase-locked loop (PLL)
- Available frequency bands:
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- Sync frequency: Ultrasonic
- RF power output:
- 5L: Low 10 mW / High 50 mW
- 5H: Low 10 mW / High 50 mW
- 6M: Low 10 mW / High 20 mW
- Display by: LCD + LED
- Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock
- RF stability:
- Modulation frequency shift: Wideband FM ±48kHz deviation
- Harmonic radiation:
- Input jack: 4-pin mini jack
- Battery: 2 x AA alkaline battery or NiMH rechargeable battery
- Charging contacts: Yes
- Finish: Black polyurethane paint
- Dimensions (without antenna):
- Height: 3.2 in. (81.5mm)
- Width: 2.54 in. (64.5mm)
- Depth: 0.98 in. (25mm)
- Net weight: 6.14 oz. (0.174 kg)
- Gross weight: 8.29 oz. (0.235 kg)
- RE3-RX Diversity Receiver
- Frequency oscillation mode: Phase-locked loop (PLL)
- Available frequency bands:
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- Sync frequency: Ultrasonic 40 kHz
- Diversity: Antenna diversity
- Bandwidth: 36MHz
- Signal/Noise ratio: >100 dB(A)
- Total harmonic distortion (THD):
- Receiving sensitivity: -81dBm for -12dB SINAD
- Frequency response:
- 63 Hz ~ 16 kHz, ±2 dB (BPT)
- 51 Hz ~ 16 kHz, ±2 dB (HHT)
- Antenna type: Detachable ½ wave with BNC connector
- Antenna booster power: DC12 - 15V/100mA
- Function display by: LCD
- Audio frequency output level, Ref: ±22.5 kHz Dev @ 1 kHz Tone:
- ¼” (6.3mm) Phone Jack: -10 dBV
- XLR Jack: -4 dBV (Line)、 -24 dBV (MIC)
- Audio frequency output impedance:
- 240 Ω (unbalanced)
- 1400 Ω (balanced)
- Squelch and noise muting: Noise muting and tone code locking
- Output ports:
- balanced XLRM jack
- unbalanced ¼” TS (6.3 mm) jack
- Power supply: DC12~15 V/500 mA
- Finish: Black polyurethane paint
- Dimensions:
- Width: 8.27 in. (210 mm)
- Height: (with feet attached) 1.85 in. (47 mm)
- Height: (without feet attached) 1.73 in. (44 mm)
- Depth: (including antenna jack) 6.89 in. (175 mm)
- Depth: (not including antenna jack) 6.1 in. (155 mm)
- Net weight: 2.71 lb (1.23 kg)
- Gross weight: 3.28 lb (1.49 kg)