Liberty AV FTPSA0A Category 6A/7 Shielded 8P8C Field Terminable RJ45 Plug

With its Polycarbonate and ABS build complimented with Nickel Plated Zinc shielding, Liberty’s FTPSA0A Field Terminable Category 6A/Class EA Plug is a fully compliant component for Digital Multimedia and networking links. The connector fits a wide range of conductors and cable diameters and supports 10GBaseT networking speeds. This unit features a 750 mating minimum lifecycle and 50μ inch gold plating on the contacts.

The FTPSA0A features a reusable IDC format with a load bar that can be reused up to 5 times (Recommended maximum). No special tooling is required to terminate this connector. The action of closing the connector pushes the load bar down and completes the termination cycle. The boot is cut to the diameter required for the cable.

Applications

• LAN 10/100/1000/10GBaseT, High Speed Balun, Digital Media
• Audio, InfraRed (IR), RF Video, Voice, Voice over IP
• Any and All TWP pair cable up to 8.5mm in diameter

Features

• Male 8P8C Modular RJ45 Plug
• IDC Contact Style for 24 to 22 AWG TWP Cabling
• No Special Tools required, just cable prep tools
• 500 MHz Sweep Test and Class EA Certification
• Category 6, 6A, 7 F/UTP, SF/UTP, F/STP, S/FTP Formats
• Strain relief boot trimmable to cable diameter

Specifications

• I/O Connections:
  • Networking: Male 8P8C RJ45, Shielded
  • Infrastructure: IDC, ANSI/TIA‐568 Compliant for field termination
• Electrical Specifications:
  • Insulation Resistance: ≥ 500MΩ
  • Dielectric Withstanding Voltage: 1000VDC
  • Contact Resistance: ≤ 20mΩ
  • Current Rating: 1.5A @ 68°F (20°C)
• Mechanical Specification:
  • Plug Insertion Life: ≥ 750 Mating Cycles
  • Conductor sizes supported: Solid Wire: 22~26AWG, Stranded Wire: 22~27AWG
  • Re‐termination Capability: 5 Cycles
  • Temperature Test: ‐40°F to 150°F (‐40°C to 66°C)
• Physical Specification:
  • Body Material: Polycarbonate and ABS, UL94V0
  • Shielding: Nickel Plated Zinc
  • Contact and Plating: Phosphor Bronze with 50μ” Gold Plating over contact area
  • Wiring Label: ANSI/TIA‐568 A and B, PNO
• Environmental Requirements:
  • Operating Temperature: 0° to +75° C (+32° to +167° F)
  • Operating Humidity: 20% to 85%, Non‐condensing
  • Storage Temperature: ‐20° to +80° C (0° to +176° F)
• Power and Regulatory:
  • Regulatory: IEC 60603‐7‐5, UL Listed Communication Circuit Accessory file E135640
  • Performance: ANSI/TIA‐568‐C.2 Category 6A