Product Overview
The new TOA MM-700F Matrix Mixer is developed from years of experience providing mixers for the retail industry (with a client list that’s a virtual “who’s who” of retail) and with the cooperation of some of its top players, the MM-700F is designed to address the demand for simpler and more cost-effective, mid-level background music and paging systems needing simple control with multiple zones. Just as advanced as some of its high-priced kin, but without the complicated setup or programming required by many other solutions.
At its core, the MM-700F is a 6-input matrix mixer: 4 of its inputs are configured for BGM or other line-level sources, while two balanced inputs are designated for priority sources, such as paging mics or message players. A totally digital product sporting 24Bit / 48kHz digital sound quality, its simple user-interface belies its advanced inner workings. The only controls any user needs to access are the front panel source select buttons and four output level (zone) controls. All other controls are placed on the rear panel to prevent unauthorized tampering.
Includes:
- Power cord (2m (5.65ft)) x1
- Removable terminal plug (5 pins x2, 3 pins x1, 2 pins x4)
- Rack mounting bracket x2
- Bracket mounting screws x4
- User manual x1
Features:
- Four stereo-summing line inputs with matrix routing to four line outputs
- Each line input has an input level adjustment and assign restriction setting for each output to prevent wrong routing selection
- Two priority mic/line inputs with different priority levels for paging or other pre-recorded sources that can override the selected line input on assigned output channels
- Each priority input also has input level, mute sensitivity, and mute hold time adjustments
- Selectable DSP preset selections include general EQs, like loudness curves, TOA speaker EQs, and crossover settings to be used with subwoofers
- Each output channel also has auxiliary line output to deliver audio to other systems
- Does not require any PC programming or network connection for setup at site (maintenance purpose only)
Specifications:
- Power Source: 100 - 240VAC, 50 / 60Hz
- Power Consumption: 9W or less (standby)
- Frequency Response: 20Hz - 20kHz (-3dB / +1dB)
- Total Harmonic Distortion: 0.5% or less, @ 1kHz, rated output
- Certifications: cULus 60065, EN60065, EN55032, EN55020, FCC part 15 class A
- Input Priority:
- 1-2: Mic -60dB / Line -10dB selectable, 2.2kΩ, electronically-balanced, removable terminal block
- Line In 1-4: -10dB, 10kΩ, unbalanced, 2 RCA jacks (Stereo summing)
- Output:
- Line Out 1-4: 0dB, 600Ω, unbalanced, removable terminal block
- MOH: 0dB, 600Ω, transformer balanced, removable terminal block
- DSP Preset: 16 presets in 4 banks at each output channel, selectable
- S/N Ratio:
- Mic: 60dB or more
- Line: 75dB or more (A-weighted)
- Muting: Manual mute / Automatic mute
- Mute Hold Time: 50ms - 10 seconds, adjustable
- Priority Level: PRIORITY 1 > PRIORITY 2 > LINE 1-4
- Control Power: ON/OFF switch, Power remote terminal
- Priority 1-2: MIC / LINE selector switch
- Gain control
- Assign switch
- Auto mute switch
- Mute sense control
- Manual mute terminal
- Mute hold time control
- Priority mix switch
- Line In 1-4:
- Gain control
- Assign restriction switch
- Output 1-4:
- LINE In 1-4 selector switch
- Output gain control
- DSP bank selector switch
- DSP preset selector switch
- Remote 1-4:
- Remote control connector (RJ-45)
- Remote link switch
- Indicators Power:
- 1 Power LED
- Priority 1-2: 1 Signal LED, 1 Peak LED
- Line In 1-4: 1 Signal LED, 1 Peak LED
- Output:
- 2 Activated PRIORITY LED
- 1 Connected REMOTE LED
- 4 Selected LINE LED
- 1 Signal LED
- 1 Peak LED
- Operating Temperature: 0 to 40°C (32 to 104°F)
- Operating Humidity: 35% to 80% RH (no condensation)
- Finish Panel: Aluminum, hair line, black; Case: Steel plate, black, paint
- Dimension 420 (W) x 107.6 (H) x 350mm (D) (16.54" x 4.24" x 13.78")
- Weight: 5.7kgs (12.3lbs)
