Electro-Voice RE3-ACC-AASP 2-in x 8-out Antenna Splitter 470-960MHz

A professional, wide bandwidth, active antenna splitter, the AASP from Electro-Voice is designed to function as the distribution hub of RF and DC power in a multichannel wireless microphone system. This unit actively splits each of the incoming antenna signals (A and B) into 4 connected diversity receivers within the system—without signal loss, plus it distributes DC to power as well to each of the 4 receivers. It also includes a convenient cascade output per antenna, enabling incoming signals to be directly sent to another AASP unit (additional units sold separately) with zero loss, and without sacrificing any of the 4 RF outputs per side. A total of 5 of these splitters can be cascaded from a single pair of antennas. Also, it features a selectable booster feed that powers active antennas and/or booster amps with 12 VDC. And although the factory default setting is "on", should the need arise for the booster feed to be "off", an on/off switch can be accessed on the main circuit board inside the chassis.

Features

• Active 2-in x 8-out antenna splitter
• Distributes DC to power 4 receivers
• Splits 2 antennas into four diversity receivers
• Selectable booster feed for powering active antennas and boosters
• Additional cascade output per antenna allows stacking splitters without sacrificing 2x8 function

Specifications

• Frequency range: 470 - 960 MHz
• RF output gain: 3 dB (±2 dB)
• Cascade output level: 0 dB - +2 dB
• Output connection isolation 25 dB
• Third order intercept point: 24 dBm
• Impedance: 50 Ω
• Input voltage: 12 VDC/5 A
• Output DC voltage: +12 V 1 A x 4
• Antenna booster DC voltage: 12 V
• Dimensions (L x W x D): 18.93" x 8.94" x 1.71" (481 x 227 x 43.4mm)
• Finish: Polyurethane paint, black
• Weight:
  • Net: 6.78 lbs. (3.07 kg)
  • Gross: 8.16 lbs. (3.7 kg)