Product Overview
The AT2035PK is a Streaming/Podcasting Vocal Microphone Pack from Audio-Technica that's intended for streamers, podcasters, and other content creators who require an easy-to-install and easy-to-adjust, yet versatile boom microphone setup. This pro-quality package includes an AT2035 cardioid condenser microphone, a set of ATH-M20x professional monitor headphones and a studio boom arm threaded with an XLR cable.
- AT2035 Microphone - A rugged side-address studio condenser microphone that delivers remarkable detail along with low noise. It comes with a switchable 80 Hz high-pass filter and 10 dB pad. It can handle high sound pressure levels (SPLs) with ease, and features an AT8458 shock-mount to attenuate any noise, shock or vibration that may be transmitted through a boom. Its standard analog XLR output connects easily to a digital converter or mixer.
- The included adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 2.2" (55mm) thick. It's internally-threaded with an XLR cable for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, it repositions quickly and offers optimal mic placement.
- ATH-M20x pro headphones - Rounding out this package, and part of Audio-Technica's critically-acclaimed M-Series line. This set features 40mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, making it ideal for long monitoring sessions.
Applications
Streamers • Podcasters • Other Content Creators
Includes
- AT2035 Cardioid Condenser Mic
- ATH-M20x Professional Monitor Headphones
- Adjustable Studio Boom Arm
- AT8458 shock mount for ⅝"-27 threaded stands
- ⅝"-27 to ⅜"-16 threaded adapter
- ¼" (6.3mm) snap-on adapter
- Soft protective pouch
Features
- AT2035 Cardioid Condenser Microphone:
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- ATH-M20x Professional Monitor Headphones:
- Advanced build quality and engineering
- 40mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Adjustable Studio Boom Arm:
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 2.2" (55mm) thick
- Included XLR cable (XLRF to XLRM) extends 10' (3m) from the base of the boom arm
- Internal cable management for clean desk appearance
Specifications
- AT2035 Microphone:
- Element: Fixed-charge back plate, permanently-polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20 Hz to 20,000 Hz
- Low Frequency Rolloff: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -33 dB (22.4 mV) re 1 V at 1 Pa
- Impedance: 120 Ω
- Maximum Input Sound Level:
- 148 dB SPL, 1 kHz at 1% T.H.D.
- 158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range (typical): 136 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11 - 52 VDC, 3.8 mA typical
- Switches:
- Flat, rolloff
- 10 dB pad (nominal)
- Weight: 14.2 oz. (403 g)
- Dimensions (L x Ø, max.): 6.69" x 2.05" (170.0 x 52mm)
- Output Connector: Standard Integral XLR3-M type
- ATH-M20x Headphones:
- Type: Closed-back dynamic
- Driver Diameter: 40mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 Hz to 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 Ω
- Weight: 6.7 oz. (190 g), without cable and connector
- Cable: 9.8' (3.0 m), straight, left-side exit
- Note: further information can be found within the items located under the "Documentation" tab above.
