Product Overview
The Martin VDO Atomic Dot CLD hybrid fixture, available in a WRM color temperature variation as well, brings together a compact strobe, modest blinder, video-pixel, and petite spotlight.
Through the fusion of a video-controlled Aura backlight and a luminous strobe/blinder dot within a singular unit, lighting designers are bestowed with an expanded realm of creative possibilities, allowing for a more profound resonance with audiences. This compact design further grants designers the flexibility to position VDO Atomic Dots in nearly any location and to deploy them in larger quantities. Comprehensive compatibility with P3, DMX, Art-Net, and sACN obviates the necessity for additional interface boxes, with the added advantage of onboard P3 support facilitating pixel mapping and the utilization of the fixture as a video-controlled strobe or blinder.
Integrated interlocking mechanics enable the amalgamation of multiple VDO Atomic Dots into battens, arrays, or innovative configurations. The hybrid cable, accommodating DMX, Art-Net, sACN, and P3, ensures swift and straightforward connections.
VDO Atomic Dots stand as the optimal choice for rental customers and lighting designers engaged in concert/touring ventures and TV show productions, while also effectively catering to corporate and nightclub clientele.
Martin Pro VDO Atomic Dot CLD Features:
- Cold white (5700K) beam/strobe/blind/eye-candy fixture
- 3350 lumen boost/strobe
- 1600 lumen continuous
- Beam angle of 11 degrees
- Field angle of 22 degrees
- Pixel-controllable RGB Aura backlight
- Compact form-factor
- Built-in power supply (100-240V)
- Power and Data IN & THRU via hybrid cable (PDE System)
- P3, DMX, Art-Net & sACN compatible
- Built-in pixel-FX on backlight and beam
- Front-accessory holder for barndoors and/or diffuser/lens
- Detachable yoke-assembly
- Smart interlocking mechanics to build battens, arrays and creative shapes
- Compatible with Martin VDO Atomic Bold interlocking mechanics for mixed arrays
- Passive cooling
- IP65 rated
Martin Pro VDO Atomic Dot CLD Specifications:
- Physical:
- Width excluding hanging bracket: 130 mm (5.1 in.)
- Width including hanging bracket: 175 mm (6.9 in.)
- Height excluding hanging bracket: 134 mm (5.3 in.)
- Height including hanging bracket: 242 mm (9.5 in.)
- Horizontal fixture spacing: 150 mm (5.9 in.) (center-to-center using interlock couplers)
- Vertical fixture spacing: 150 mm (5.9 in.) (center-to-center using interlock couplers)
- Depth: 146 mm (5.7 in.)
- Weight including hanging bracket: 2.2 kg (4.85 lbs.)
- Weight excluding hanging bracket: 2.0 kg (4.41 lbs.)
- Dynamic Effects:
- Beam Dimmer/Shutter: 0 – 100% continuous dimming, variable flash rate and duration, and atomic effects
- Beam Dimming options: Choice of four dimming curves
- Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
- Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe effects
- Aura Dimming options: Choice of four dimming curves
- Aura Color mixing: RGB, independently variable 0 - 100%
- Aura Color temperature control: Variable 2000 - 11,000 K
- Aura Virtual Color wheel: 36 color presets, continuous rotation & random color
- Aura PixelMapping: individual RGB control of each Aura pixel
- Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
- Built-in FX: Various pre-programmed FX on Beam, Aura and combination of both
- Control and Programming:
- Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3
- Protocol detection: Automatic
- DMX channels: 1, 3, 4, 19, 64
- Setting and addressing: RDM, RDM over Art-Net or P3 DMX Modes: 1-channel, 3-channel, 4-channel, Basic, Extended
- Fixture Identification: User-settable ID number
- DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
- Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
- sACN Compliance: ANSI E1.31 - 2016 Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
- DMX/RDM Transceiver: RS-485
- Ethernet Transceiver: 10/100Mbit
- Firmware update: via DMX using Martin Companion or via Ethernet using P3 System Controller
- Control/User Interface:
- Device status: Multi-color status
- LED Device test and reset: Pushbutton to call up local test patterns and reset device
- Optics and Photometric Data:
- Lens Diameter: 95 mm
- Front Accessory Holder: PAR30 size
- Beam/Strobe LED
- LED Type: Cold White
- Max. total lumen output: 3350 lumens (boost/strobe mode)
- Max. total lumen output: 1600 lumens (continuous mode)
- Beam Angle: 11 Degrees (half peak)
- Field Angle: 22 Degrees (one-tenth peak)
- Binning: Tight color and flux binning
- Color Temperature: 5700 K
- CRI (Color Rendering Index): >80
- Resolution: 16-bit
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- Aura Backlight LEDs
- LED Type: RGB
- LED Quantity: 16
- Binning: Tight color and flux binning
- Color Temperature: Variable (2000-11,000 K)
- Resolution: 16-bit per color per pixel
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)
- P3 Video Processing:
- Color Resolution: 16 bit per color (48 bit per pixel) (Aura)
- Color Temperature Control: 2000-11,000 K (Aura)
- Synchronization: System-wide
- Frame Rate: Up to 75 frames/sec
- Brightness Control: 0-100% (maintaining full color depth)
- Color Gamut Control: full spectrum control (Aura) Gamma Correction and Control: fully controllable (Aura)
-
- Construction:
- Housing: Aluminum
- Color: Black
- Protection rating: IP65
- Installation:
- Mounting options: hanging from bracket, hanging from clamp attached directly to fixture or hanging from other fixture using interlock mechanism Location: indoor or temporary outdoor use
- Clamp attachment to hanging bracket: M12
- Clamp attachment directly to fixture: M8
- Maximum vertical column height: 16 fixtures
- Orientation: Any Minimum distance to combustible materials: 0.1 m
- Minimum distance to illuminated surfaces: 0.2 m
- Connections:
- AC Power, DMX and Network input: cable tail with PDE hybrid connector (IP65)
- AC Power, DMX and Network thru: chassis-mount PDE hybrid connector (IP65)
- Electrical:
- AC power: 100-240 V AC nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Typical half-cycle RMS inrush current at 230 V, 50 Hz: 1.1 A
- Typical earth-leakage current: 0.25 mA
- Power Factor: 0.99 @ 100 V , 0.98 @ 120 V , 0.95 @ 208 V , 0.96 @ 230 V , 0.94 @ 240 V
- Max current draw: 0.6 A @ 100 V / 120 V , 0.3 A @ 208 V / 230 V / 240 V
- Typical current draw: 0.5 A @ 100 V , 0.4 A @ 120 V , 0.2 A @ 208 V , 0.2 A @ 230 V , 0.2 A @ 240 V
- Power Consumption:
- Maximum: 55 W
- Typical: 50 W
- Idle: 4 W
- Thermal:
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature (Ta min.): 0° C Typical heat dissipation (calculated, +/- 10%): 171 BTU/hr
- Environmental:
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Efficacy (max output): 74.4 lm/W
- LWR: 1,523 lm/kg (691 lm/lb)
