AJA OG-FiDO-2R-MM openGear 2-Channel Multi-Mode LC Fiber to 3G-SDI Receiver

Offering unmatched flexibility and cost efficiency AJA's OG-FiDO-2R-MM is a 2-Channel Multi-Mode LC Fiber to 3G-SDI Receiver. The OG-FiDO-2R-MM handles 3G-SDI Fiber conversion, allowing for cable runs up to 2296 feet (700 m) for OM4 and 984 feet (300 m) for OM3 for Multi-Mode fiber optic cables - useful for eliminating ground loop problems.

The OG-FiDO-2R-MM is designed for use in high-density openGear’s 2RU frames and AJA’s OG-X-FR 2RU frame, with DashBoard Software support on Windows®, macOS® and Linux offers remote control and monitoring of the openGear architecture and provides convenient and industry-standard configuration, monitoring and control options over a PC or local network.

The inputs are re-clocked with best-in-class input jitter tolerance. The two channel cards have completely independent paths, allowing different SDI rates to be carried on each channel. The fiber connector is attached to the main card for added reliability and cost savings.

NOTE: In order to allow direct fiber connection to the card, and avoid problematic optical couplers, AJA FiDO openGear cards have the rear connectors attached to the front card. This means that the card cannot be removed from the frame with the SFP module, cables, and/or BNC retaining nuts installed.

Features

• Video Formats: 150 Mbps - 3 Gbps, format agnostic
• Inputs: 2x Multi-Mode LC Fiber
• Outputs: 2x 3G-SDI BNC
• Monitor via openGear DashBoard
• Input Present and Input SMPTE Lock LEDs
• Automatic detection and reclocking
• 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
• Nominal Wavelength: 850 nm
• Power: 2.5 watts
• Hot swap capable
• Compatible with OGX, OG3 and DFR-8321 openGear frames

Specifications

• Video Formats: 150 Mbps - 3 Gbps, format agnostic
• Video Input Digital:
  • 2-Channel independent Multi-Mode LC Fiber Inputs, SMPTE-297
  • Nominal Wavelength: 850 nm
  • Optical Sensitivity: -15dBm (min)
• Video Output Digital: 2-Channel independent 3G-SDI BNC Outputs, SMPTE-259/292/424
• Reclocking:
  • 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.966 Gbps, 2.970 Gbps - Auto Select
  • All other rates are passed through and not reclocked
• User Interface: openGear DashBoard network control software via Windows, macOS or Linux
• Size (w x d x h): openGear standard form factor, front slot and rear card. Two slots required for each card.
• Weight: 0.5 lb (0.3 kg)
• Power: openGear frame compatible, 2.5 watts max per card
• Environment:
  • Safe Operating Temperature: 32 to 104 F (0 to 40 C)
  • Safe Storage Temperature (Power OFF): -40 to 140 F (-40 to 60 C)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: < 10,000 feet (< 3,000 meters)