Product Overview
Mouser's MUX-500759-TX is a video wall 4K over IP PoE extender kit that allows HDMI equipment to support up to 4K @ 30Hz ro 1080p at 60Hz resolution to be connected and extended to create a Video Wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array.
MuxLab MUX-500759-TX Includes:
- MUX-500759-TX PoE Extender Transmitter
MuxLab MUX-500759-TX Features:
- Configure a 4K Video Wall array with 100’s of displays, depending on network bandwidth
- Supports up to 4K @ 30Hz and 1080p @ 60Hz
- Visually lossless video (1 frame latency)
- Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
- Transmission up to 330ft (100m) over Cat5e/6
- Supports audio insert (TX) & audio extract (RX)
- Supports RS232 and IR transmission for remote control
- PoE powered
- Control via any web device (mobile, tablet) with the use of model 500811 (Pro Digital Network Controller)
MuxLab MUX-500759-TX Specifications:
- Environment: HDMI 2.0b
- Devices: Blu-Ray, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
- Bandwidth: 300MHz
- Signals: HDMI 2.0b, HDR10 and HDCP 2.2
- Connectors:
- One (1) HDMI receptacle.
- One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
- One (1) 3.5mm jack for Directional IR (IR emitter or IR sensor).
- Two (2) 3.5mm jacks for audio insert (on TX)/audio extract (on RX).
- One (1) DB9 for the RS232
- Four (4) DIP Switches for device ID addressing.
- Maximum Distance: Cat5e/6: 330ft (100m) up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
- Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
- Latency: Typical one (1) Frame (16ms), maximum 2 frames (33ms)
- Compression: JPG2000
- Bandwidth: Up to 500Mbps
- Network Requirement: 1 Gbps Ethernet network supporting IGMP, Jumbo Frames and PoE
- IR Frequency: 38 to 56KHz (IR Emitter and IR Sensor sold separately)
- RJ45 Pin Configuration (Reverse Polarity Sensitive. Use EIA/TIA 568A or 586B straight-through wiring.):
- RJ45 Link:
- Pin 1 (R) Pin 2 (T)
- Pin 3 (R) Pin 6 (T)
- Pin 4 (R) Pin 5 (T)
- Pin 7 (R) Pin 8 (T)
- Cable: One (1) Cat 5e/6 or better twisted pair cables required
- Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
- PoE: IEEE 802.3af
- Power Consumption: Transmitter: 6 W Receiver: 6 W
- Temperature:
- Operating: 0° to 40°C
- Storage: -20° to 85°C
- Humidity: Up to 95% non-condensing
- Dimensions: 4.40” x 5.08” x 1.00” (112mm x 129mm x 25mm)
- Weight: 1.5lbs (0.68kg)
- Compliance:
- Regulatory: FCC, CE, RoHS
- Flammability: 94V0
- Warranty 3 years
- Order Information:
- 500759-TX HDMI 4K over IP PoE Transmitter (UPC: 627699907597)
- 500759-RX HDMI 4K over IP PoE Receiver (UPC: 627699807590)