Product Overview
Crestron GLS-OIRLCL-C-CN Ceiling Mount Passive Infrared Occupancy & Daylight Sensor, Cresnet
The GLS-OIRLCL-C-CN is an occupancy or vacancy sensor with a built-in closed-loop photosensor for Crestron® systems. It has a miniaturized flush ceiling mount design for a nearly hidden appearance and quick installation.
Crestron GLS-OIRLCL-C-CN Includes:
- Ceiling Mount Passive Infrared Occupancy & Daylight Sensor, Cresnet®
Crestron GLS-OIRLCL-C-CN Features:
- Passive infrared (PIR) motion detection
- 450 square foot rectangular detection pattern
- Fully digital circuitry for reliable, accurate performance
- Adjustable sensitivity and time-out
- Short time-out “walk-through” mode
- Vacancy only mode with grace occupancy
- Built-in closed loop photosensor for daylight harvesting
- Monitors ambient light from natural and artificial sources
- Reduces energy consumption by enabling automation of lighting, shading, HVAC, and AV equipment
- Maintains consistent lighting levels
- Reports room usage to Crestron Fusion®
- Cresnet® wired control system interface
- Miniaturized design for a nearly hidden appearance
- Installs quickly in a one-inch (25mm) diameter hole
- 24VDC powered via Cresnet
- Color-coded flying lead connections
- Easy setup via software or IR remote (sold separately)
- IP64 dust-proof and splash-proof
Crestron GLS-OIRLCL-C-CN Specifications:
- Motion Sensing
- Sensor Technology: Passive infrared, 64 detection zones
- Detection Area: 450 sq ft (42 m2 )
- Detection Pattern: Rectangular 18.57 x 24.34 ft (5.66 x 7.42 m) with 8.2 ft (2.5 m) ceiling height
- Maximum Ceiling Height: 16.4 ft (5 m)
- Light Sensing
- Sensor Technology: Closed-loop photocell
- Light Sensitivity: 0 to 1000 lux (0 to 93 foot-candles)
- Field of View: 360° hemispherical
- Controls & Indicators
- LED: (1) Bi-color red/green LED, indicates detection of motion and other functions during setup (may also be enabled to indicate detection of motion during normal operation if desired)
- Beep Tone: Indicates detection of motion and other functions during setup
- IR Remote (Sold Separately): OCC/VAC/EXIT SETUP: Enters or exits occupancy or vacancy setup mode; TIMEOUT: Selects 0.5, 2, 5, 10, 15, or 30 minutes; SHORT TIMEOUT: Enables or disables “walk-through” mode, which temporarily sets timeout to 60 seconds if occupancy is detected for less than 90 seconds; LED: Enables or disables visible indication of motion detection during normal operation; PIR SENSITIVITY: Selects high, medium, low, or off; SET ID: Enables network ID to be set using the numeric keypad; RESET: Restores factory settings; FORCE VAC: Puts sensor into a vacant state
- Connections: (4) Flying leads, color-coded for connection to the Cresnet control network
- Power
- Cresnet Power Usage: 1 Watt (42 mA @ 24 Volts DC)
- Power Consumption: 625 mW
- Environmental
- Storage Temperature: -4° to 158° F (-20° to 70° C)
- Operation Temperature: -4° to 140° F (-20° to 60° C)
- Humidity: 15% to 85% RH (non-condensing)
- Ingress Protection: IP64 rated per IEC 60529
- Heat Dissipation:
- Construction
- Housing: Plastic, cylindrical, white finish
- Mounting: Flush ceiling mount in drywall or ceiling tile, 1 inch (25 mm) diameter hole required
- Dimensions
- Diameter: 1.50 in (38 mm)
- Depth: 2.15 in (55 mm) Protrudes 0.2 in (5 mm) from ceiling surface
- Weight: 1 oz (27 g)
