Product Overview
The VM-3240VA is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 6-output selector. It permits not only general-purpose broadcast, but also Emergency broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Emergency broadcast can be made from an optional RM-300MF Fireman's Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures.
Includes:
- Power cable (2m (6.56ft)) x1
- Setting software-CD x1
- Link cable (3m (9.84ft)) x2
- Plastic foot x4
- Plastic foot mounting screw x4
- Removable terminal plug (14-pin) x3
- Removable terminal plug (16-pin) x1
- Emergency microphone (hand-held type) x1
Specifications:
- Power Source: 230VAC, 50 / 60Hz
- Power Consumption: 600W (with rated output signal), 260W (according to EN60065)
- Rated Output: 240W
- Frequency Response: 50Hz - 20kHz, ±3dB (at 1/3 rated output)
- Distortion: 0.7% or less (at rated output, 1kHz)
- S / N Ratio: 85dB or more
- Audio Input / Output Characteristic Sampling frequency: 48kHz
- A/D-D/A converter: 24-bit
- Input:
- Input 1 - 3: -50dB* (MIC) / -10dB* (LINE) (changeable), 600Ω, electronically balanced, combined XLR connector (female) / phone jack
- Input 4: -50dB* (MIC) / -10dB* (LINE) (changeable), 600Ω, electronically balanced, removable terminal block (14-pin)
- BGM 1 - 2: -10dB*, 10kΩ, unbalanced, RCA pin jack
- External amplifier input: 100V line, removable terminal block (14-pin)
- Output:
- Speaker output 1 - 2: Max. (240W) per output
- Speaker output 3 - 6: Max. (120W) per output
- Speaker output 1 - 6: Total within 240W, removable terminal block (14-pin)
- Allowable minimum load: 500Ω (20W) at 100V line for speaker line failure detection
- Direct output: Direct output from internal or external amplifier, removable terminal block (16-pin)
- Recording output BGM / Paging: 0dB*, 10kΩ, unbalanced, RCA pin jack
- RM Link:
- Input 1 - 2: Connecting the RM-300MF / RM-200M Remote Microphone.
- RJ-45 female connector
- Maximum distance: Total 800m (874.89yds) between this unit and remote microphones
- Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT 5-STP)
- Network I / F
- 10BASE-T / 100BASE-TX (selectable by automatic negotiation), RJ-45 female connector
- Maximum distance: 100m (109.36yds) between this unit and a switching hub
- Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT 5-STP)
- VM Link:
- Output: Connecting the VM-3240E or VM-3360E, RJ-45 female connector
- Maximum distance: 800m (874.89yds)
- Link cable: Category 5 Shielded Twisted-Pair straight cable (CA T5-STP)
- EXT PA Link:
- Connecting the VP-2241 or VP-2421, RJ-45 female connector
- Maximum distance: 5m (16.4ft)
- Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT 5-STP)
- General Control:
- Input 1 - 8: No-Voltage make contact input, open voltage: 24VDC, short-circuit current: 2mA or less, removable terminal block (14-pin)
- Output 1 - 8: Isolated open collector output, withstand voltage: 30VDC, operating current: 10mA or less, removable terminal block (14-pin)
- Emergency Control Input 1 - 5: No-Voltage make contact input, open voltage: 24VDC, short-circuit current: 2mA or less, RJ-45 female connector
- Input 6: Isolated voltage input, Inactive: -24V ±20%, Active: +24V ±20%, RJ-45 female connector
- Status out: Relay contact output, withstand voltage: 40VDC, operating current: 2 - 300mA, RJ-45 female connector
- ATT Control: Relay contact 1-6, 125VAC or 30VDC, total under 5A, removable terminal block (16-pin)
- Power Input / Output Power in: Connecting the VX-2000DS only (operating range: 20 - 40VDC)
- PS out: 28VDC / 18A
- M4 screw terminal, distance between barriers: 11mm (0.43")
- DC24V
- Output: 24VDC, Maximum feeding current 0.3A
- Ds Link: Connecting the VX-2000DS, RJ-45 female connector
- Maximum distance: 5m (16.4ft)
- Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT 5-STP)
- Operating Temperature: -5°C to +45°C (23°F to 113°F)
- Operating Humidity: 5% to 95% RH (no condensation)
- Finish: Panel: Aluminum, hairline, black
- Case: Surface-treated steel plate, black, paint
- Dimensions: 482 (W) × 132.6 (H) × 431.2 (D) mm (18.98" × 5.22" × 16.98")
- Weight: 16.5kg (36.38lbs)
