Atlas IED DNA2404CH 4-Channel Digital Power Amplifier, 6000W, 100V, CobraNet

The DNA2404CH amplifier from AtlasIED, featuring CobraNet® digital audio input and four channels of 600 watt amplification, is an integral part of the IED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary, when a full 16-zone T9160 amplifier frame is not required.

The internal Class-D (switching mode) dual channel amplifiers deliver 600W per channel into the rated loads (100-Volts into 16Ω). They impart higher efficiency, increased reliability, improved performance, and lower operating cost. The amplifier card has 34dB of gain from its analog input to the speaker output.

Attenuation is handled ahead of the power amplifier by DSP controls through software. Inputs are provided for connecting up to eight (8) 540S ambient noise sensors (2 sensors for each output channel). This allows the output of each channel to be automatically adjusted in real time based on the measured ambient noise level in the zone.

The DNA2404CH features LED indicators for power, audio signals and fault status. A Form C relay is also included to indicate that a fault is present. The DNA2404CH provides 600 watts per channel for 100-volt transformer-distributed speaker systems and operates from a 220 VAC power source.

Atlas Sound DNA2404CH Features:

• Includes CobraNet® Input
• Compatible with IED GLOBALCOM® systems and 3rd party CobraNet® devices
• Dual-redundant Ethernet ports
• 7-band parametric EQ and a high-pass and low-pass filter per channel
• Continuous, Real-time Ambient Noise Analysis and Automatic Output Level Control
• Four 600 watt amplifier output channels
• 100-Volt Output
• LED indicators for power, audio signals and faults
• Built-in Automatic Loudspeaker Line Testing detects Ground Faults, Breaks and Changes in Loudspeaker Loads
• Fault reports and amplifier status available over Ethernet using standard SNMP protocol
• Supports independent background music for all channels with automatic ducking when paging audio is present
• Two inputs for ambient noise sensors for each amplifier output channel
• Sound masking with 18 bands of EQ for each channel

Atlas Sound DNA2404CH Specifications:

• Output Power: 600-watts x 4-Channels at Rated Power
• Operating Temperature Range: +32 °F – +104 °F (0 °C – +40 °C)
• Width: 19" (48.3cm) with Rack Ears
• Height: 3.5" (8.9cm)
• Depth: 17" (43.2cm)
• Weight: 19.2lb (8.7kg)
• Storage Temperature Range: -40 °F – +158 °F (-40 °C – +70 °C)
• Voltage Compatibility: 220V - 240V