Atlas IED IP-SDM-LF IP-SDM with Large Baffle to Mount with Lowell Retro PC312

The IP-SDM-LF speaker with display and talkback provide equally “effective communication”. “Under Title II of the ADA, all state and local governments are required to take steps to ensure that their communications with people with disabilities are as effective as communications with others.”

The IP-SDM-LF indoor wall-mount IP speaker with talkback allows VoIP communication systems to extend tele-presence with improved audio for environments that require network-wide communication and need large speakers to overcome high ambient noise areas or large spaces.

The IP-SDM-LF registers as a communication endpoint directly within InformaCast, and Revolution Advanced Notification applications. It supports audio broadcasts for physical security and improves day-to-day communications with advanced alerting, pre-recorded scheduled announcements, bell schedules, and intercom.

When used in a Cisco Environment, the IP-SDM-LF can join Cisco’s Unified Survivable Remote Site telephony (SRST) as a supported device in the SRST endpoint architecture. Cisco’s SRST provides remote location call-processing when access to their centralized Unified Communications Manager is interrupted due to a WAN outage. The ability of LAN communication between any combination of phones and speakers is critical in an emergency (which may be the actual cause of the WAN outage).

Where 3rd-party notification applications are not required, the IP-SDM-LF speakers can register as SIP devices directly to a SIP service or VoIP Communications Manager for public address/critical alert applications and 2-way communication.

Atlas IED IP-SDM-LF Applications:

Corporate

Education Institutions

Entertainment Complexes

Industrial Facilities

Government Buildings

Healthcare Facilities

Transportation Hubs

Houses of Worship

Atlas IED IP-SDM-LF Features:

• Audio:
  • 8” Dual cone speaker optimized for voice
  • Includes an omni-directional condenser mic mounted behind the grille for 2-way communication and/or monitoring
  • PoE+ enabled
  • Pre-assembled baffle and enclosure with speaker, grille, and PCB amp/control board
  • Integrated 15-watt total power amplifier
  • Aux audio line-in and line out- unbalanced
  • 2 General purpose inputs and 1 general purpose output
  • Phone/Night loud ringer
  • Includes large baffle for retrofit mounting to Lowell PC312 recessed backbox
• Network:
  • When in standby mode time is displayed with NTP synchronization. When active, display changes to visual notifications with scrolling text
  • Dynamic or static IP address
  • IEEE802.3 10/100Base-T Ethernet
  • IEEE 802.1q tagging
  • IEEE 802.11AT compliant
  • Auto provisioning: DCHP option 66, 150, or TFTP server or DHCP option 72 for HTTP server
  • Auto registration: SLP for informaCast or DHCP option 72 for Revolution or GCK
  • VoIP standard audio: G.711 u-law/a-law (64 kbit/s) or G.722 wideband audio (64 kbit/s)
  • Static configuration: HTTP GUI for static configuration or Cisco SRST

Atlas IED IP-SDM-LF Specifications:

• Speaker Type: Coaxial 8” LF, 1” HF
• Frequency Response: 86Hz – 15.5kHz
• Dispersion: 105° (2kHz octave band, -6dB points)
• Sensitivity: 98dB SPL average
• Power Rating: 12-watts max (802.3AF) / 25-watts max (802.3AT)
• Connector Type: RJ-45
• Height: 14.37” (36.53 cm)
• Width: 12.87” (32.72 cm)
• Depth: 3.42” (8.7 cm)
• Shipping Weight: 6.37 lbs (2.89 kgs)
• Safety Listed: 60950-1, 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC