RDL DS-RLC10 Remote Level Control, Rotary Optical Encoder, Stainless Stl

Remote Level Control, Rotary Optical Encoder, Stainless Stl

Features: Rotary Optical Encoder Remote Level Control Single or Multiple Control Locations Up To Ten Remote Control Locations Integral 0 to 10 VDC Ramp Generator Visual Level Display of Operating Level Display is Bright During Adjustment Display Dims After Adjustment Powers Up to Last Level Used Compatible with All RDL VCA Modules Available in Stainless Steel, Black and White

The D SERIES-RLC10 is a rotary remote level control that provides user adjustment at single or multiple locations. Optical encoder technology allows continuous knob rotation with a comfortable adjustment rate and long-term trouble-free and noise-free operation. These controls directly connect to any RDL VCA and OEM equipment with 0 to 10 Vdc ramp inputs.

• Rotary Optical Encoder Remote Level Control

A single –RLC10 may be connected to a ramp-controlled VCA using a single-pair shielded audio cable or unshielded cable. A rear-panel switch configures the control as the PRIMARY. The PRIMARY mode causes this control to drive the 0 to 10 Vdc ramp output and to monitor its pulse terminals in case any other –RLC10 controls are connected.

• Single or Multiple Control Locations

As many as nine additional –RLC10 controls may be wired in parallel with the PRIMARY control using UTP cable (CAT5, CAT6 or equivalent). The rear-panel MODE switch on each additional remote control is set to SECONDARY mode.

• Up To Ten Remote Control Locations

Operation is the same for a single control, or for each control connected in a multiple control point installation. The 0 to 10 Vdc ramp voltage is incremented up or down when the front-panel knob is rotated. Acceleration is provided so the rate of change is faster when the knob is rotated more rapidly, yielding a responsive feel and rapid elimination of acoustic feedback. The LED ring display encircling the control knob operates as a virtual pointer. When an –RLC10 is not being adjusted, its display switches to a dim intensity to avoid being a visual distraction. The display returns to a bright intensity during adjustment.

• Integral 0 to 10 VDC Ramp Generator

In the event of power loss, internal non-volatile memory stores the last level value. When power is restored, the 0 to 10 V output will return to the operating level present when power was lost.

• Visual Level Display of Operating Level

Multiple –RLC10 controls set to the SECONDARY MODE may be connected to an RDL RU-VCA2A or RU-VCA6A, utilizing the VCA as the ramp generator. This connection is also possible with OEM equipment accepting open-collector pulses that are compatible with the –RLC10 output pulse rate and width.

• Display is Bright During Adjustment

The –RLC10 controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure. Connections are made through a rear panel detachable terminal block.

• Display Dims After Adjustment

All the D SERIES-RLC10 features combine to make it the ideal choice for single point or multiple location remote level control in high quality systems. Use them with any RDL VCA module, or side-by-side with other RDL remote accessories as part of a complete audio/video system

• Powers Up to Last Level Used

DS-RLC10

• Compatible with All RDL VCA Modules

Remote Level Control

• Available in Stainless Steel, Black and White

Ramp:0 to 10 Vdc (Secondary mode input; Master mode output)

Ramp:

0 to 10 Vdc (Secondary mode input; Master mode output)

Pulse outputs (2):Open-Collector @ 20 mA (UP, DOWN)

Pulse outputs (2):

Open-Collector @ 20 mA (UP, DOWN)

Pulse duration:500 uS (min.) to 4 mS (max.)

Pulse duration:

500 uS (min.) to 4 mS (max.)

Pulse interval:500 uS (min., between consecutive pulses)

Pulse interval:

500 uS (min., between consecutive pulses)

Rotations, approximate min-to-max:5 (slow rotation, no acceleration)3 (medium rotation, with acceleration)1 (fast rotation counterclockwise)

Rotations, approximate min-to-max:

5 (slow rotation, no acceleration)

3 (medium rotation, with acceleration)

1 (fast rotation counterclockwise)

Level Control:Optical rotary encoder

Level Control:

Optical rotary encoder

Power Requirement:24 Vdc @ 50 mA, Ground-referenced

Power Requirement:

24 Vdc @ 50 mA, Ground-referenced

Mounting:Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately

Mounting:

Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately

Dimensions:Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm (w/o knob); Depth: 0.545 in. 3.93 cm (overall)

Dimensions:

Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm (w/o knob); Depth: 0.545 in. 3.93 cm (overall)

Package Type:Cardboard Box

Package Type:

Cardboard Box

Package Dimensions:3.625 x 4.625 x 2.125 in.

Package Dimensions:

3.625 x 4.625 x 2.125 in.

Shipping Weight:0.45 lbs.

Shipping Weight:

0.45 lbs.

WEEE Weight:0.285 lbs

WEEE Weight:

0.285 lbs

Tariff Code:8543.70.9960

Tariff Code:

8543.70.9960