Product Overview
The Echo 600W Dimmers offer line dimming compatibility with various load types. The Phase Adaptive dimmer is tailored for Electronic Low Voltage (ELV), Incandescent, and Fluorescent loads, while the Forward Phase dimmer is optimized for Magnetic Low Voltage (MLV) loads. Installation involves mounting the dimmers to an electrical junction box.
ETC ELVD-G2-MLV Applications:
- Houses of worship
- Education
- Hospitality
- Healthcare facilities
- Office buildings
- Conference rooms
- Meeting rooms
- Retail
ETC ELVD-G2-MLV Features:
- Single-channel, 600-watt dimmer
- Forward or Reverse-phase dimming options
- 120 V power input
- Plug and Play: ready to go out of the box, no software or external programming required
- Supports Elaho control stations and responsive controls
- Two-wire topology-free system gives you the freedom to put station where you need them
- Up to 16 output products
- Up to 500 m (1,640 ft) of control-wire per system
- Supports Demand Response via station bus
ETC ELVD-G2-MLV Specifications:
- REGULATORY AND COMPLIANCE
- cULus LISTED
- Conforms to UL 508 and UL 2043
- Rated for plenum use
- Supports Demand Response via EchoConnect
- FUNCTIONAL
- Control individual fixtures or power for tungsten, line-voltage LED and other general-purpose loads
- Supports loads up to 600 watt, minimum of 1 watt
- Phase Adaptive Dimmer provides automatic detection of required dimming mode (forward or reverse phase) with manual override selection
- Plug and Play: ready to go out of the box, no software or external programming required
- Interacts with Elaho Responsive Controls and Stations
- MECHANICAL
- Constructed of injection-molded ABS plastic
- Button interface and LED indicator per zone for configuration
- Rotary dials for selection of space and zone number
- Half-inch conduit knockout mounted
- Mains-voltage wiring exits through knockout mount
- Station bus wiring exits through side of controller
- MicroSD for field software upgrades
- Optional mounting plate available for applications that require low-voltage wiring to be in conduit
- External heatsink
- Mains power input:
- 12 AWG Hot - Black (120 V)
- 14 AWG Neutral - White
- 12 AWG Ground - Green/Yellow
- Dimmed output: 12 AWG - Red
- ELECTRICAL
- 120 V, 50/60 Hz power input
- Phase-adaptive dimming variant, default reverse phase, auto-switches to forward phase depending on load type
- Forward phase dimming variant for Magnetic loads dims in forward phase only
- 600W load capacity
- Class 2 control network
- Topology-free wiring using Belden 8471 or equivalent and one #18 ESD drain wire
- Wiring may be bus, loop, homerun or any combination of these
- Up to 500 m (1,640 ft) of control wiring per system
- Optional Cat5/5e wiring using Belden 1583A or equivalent
- Requires optional Cat5 termination accessories
- THERMAL
- Ambient room temperature: -10°–45° C (14°–113° F)
- Ambient humidity: 5–95% non-condensing
