Crown DCi 2|600N 2-Channel Power Amplifier, 600W at 4 Ohms, 70V, BLU-Link

Part of Crown's DriveCore install series, the DCi 2|600N is a 2-channel, 600 Watt installation amplifier. Based on the proprietary DriveCore technology, this high performance power amplifier is designed to provide the flexibility required for challenging 21st century installed sound applications.

DCi 2|600N is loaded with advanced features including analog and digital inputs, networking monitoring and control, programmable general purpose input/output ports and digital signal processing. Balanced analog inputs paired with Harman's proprietary BLU link for digital audio transport allow you to specify a primary input, and if audio is lost the amp automatically switches to the other input to ensure your audio is seamless.

Remotely view performance of all networked DCi amplifiers and control as needed with the included HiQnet™ for monitoring and audio manipulation. Audio Architect software and the Powered by Crown app also work with DCi amplifiers, whose digital signal processing capabilities include Level/MAX Limiters, Input/Output EQ, Delay, Matrix Mixer and Speaker Line Monitoring. Configurable GPIO ports add control to key settings such as volume controls, recall presets, or to report errors to a master computer. With advanced versatility, DCi Series amplifiers are also compact and highly energy-efficient to exceed the demands of your installed sound needs.

Features

• Digital audio transport via BLU-Link
• Balanced analog inputs
• HiQnet™ protocol over standard TCP/IP for better monitoring, control and audio manipulation
• Configurable GPIO ports can be programmed as volume controls, recall presets, or to report errors
• DSP capabilites include LevelMAX Limiters, Input/Output EQ, Delay, Matrix Mixer and Speaker Line Monitoring
• EN 54-16 compliant for life safety applications

Specifications

• Dual-Mode:
  • 2 Ohms: 300W
  • 4 Ohms: 600W
  • 8 Ohms: 600W
  • 16 Ohms: 300W
  • 70Vrms: 600W
  • 100Vrms: 600W
• Bridge Mono Mode:
  • 4 Ohms: 600W
  • 8 Ohms: 1200W
  • 16 Ohms: 1200W
  • 140Vrms: 1200W
  • 200Vrms: 1200W
• Frequency Response ( 8 Ohms, 20Hz - 20kHz): +/-0.25dB
• BLU Link Input Signal to Noise Ratio (A-Weighted):> 104dB
• Total Harmonic Distortion (at full rated power, 20Hz- 20kHz): 0.35%
• Voltage Gain: 34dB
• Damping Factor (20Hz to 100Hz): >1000
• Input Impedance (nominal balanced, unbalanced): 10kOhms, 5 kOhms
• Maximum Input Level before Compression: +20dBu
• Load Impedance (Stereo/Dual Mode): 2 - 16 Ohms;70Vrms and 100Vrms
• Load Impedance Bridge Mono: 4 - 16 Ohms; 140Vrms and200Vrms
• Cooling: Continuously variable speed forced air,front to back airflow
• Maximum Fan Noise (re dBA SPL @ 1M): 45
• Required AC Mains (+/- 10%): 100V-240V ~ 50/60 Hz
• Dimensions: 19" x 3.5" x 14.25" (48.3 x 8.9 x 35.63cm)
• Weight: 18.8 lbs (8.53 kg)
• IEC Power Connector: 15A