Shure DH5/O-MTQG Omnidirectional Headset Microphone with MTQG Connector

Lightweight and comfortable to wear, the DuraPlex DH5 headset microphone offers a neutral, full sound that will lift your performance, speech, musical, or broadcast. Rely on the DH5 headset microphone in the harshest environments, thanks to its long-lasting Shure Plex cable and a certified IP57 rating.

With an easy-to-wear headset frame, DuraPlex DH5 features a neutral, full sound quality that lives up to the highest audio standards on any stage or broadcast studio. Also available as a lavalier, DuraPlex has been extensively tested to ensure an IP57 dust-resistant, waterproof rating. The exclusive 1.6 mm Shure Plex cable with DuraPlex won’t kink, offers virtually zero “memory effect,” is fully paintable, and simply lasts longer due to a dual redundant ground, which doubles as a secondary shield.

Includes

• DH5 DuraPlex Headset Microphone
• Case
• Foam Windscreen
• Snap-fit Windscreen
• Single Tie Clip
• Sticky Mount
• TQG Locking Collar (mTQG/TA4F SKUs only)

Features

• 5 mm omnidirectional subminiature design for discrete placement and improved gain-before-feedback
• IP57 dust-resistant, waterproof rated
• Neutral, full sound quality for film, broadcast, speech, theater, and performance applications
• Advanced 1.6 mm Shure Plex cable:
• Dual redundant ground in cable serves as secondary shield for unprecedented longevity
• Immune to memory effect and kinks
• Fully paintable with typical theater paints, pens, and polishes
• Presence Cap included for tailored frequency response provides additional vocal clarity and presence (3-4 dB boost near 10 kHz)
• Connector type: TA4F (mTQG)
• Available in four colors: Black, Cocoa, Tan, White

Specifications

• Microphone Capsule: MEMS
• Polar Pattern: Omnidirectional
• Frequency Response: 20 Hz to 20 kHz
• Sensitivity: -42.5 dBV at 1 kHz
• Self-Noise, A-Weighted, Equivalent Acoustical: 31 dB SPL-A
• Signal-To-Noise Ratio: 63.0 dB
• Maximum SPL: 132.0 dB SPL, 1 kHz at 1% THD, typical
• Dynamic Range: 101.0 dB typical
• Microphone Current Draw: 220 µA, maximum
• Bias Voltage, Recommended Operating Voltage: 5 V DC, 2.6 V DC minimum
• Housing: Molded ABS
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
• Cable Diameter: 1.6 mm
• Cable Length: 66 in. (1.67 m)
• Net Weight: 20.0 g (0.7 oz.)