DPA ST4015A 4015A Stereo Pair with Clips and Windscreens in Peli Case

DPA ST4015A 4015A Stereo Pair with Clips and Windscreens in Peli Case

The DPA ST4015A consists of two carefully factory matched 4015 Wide Cardioid microphones with accessories and a durable Peli carrying case. DPA matches the mics within ±1dB for both sensitivity and frequency response. The ST4015A pair is equipped with the MMP-A standard preamp.

DPA ST4015A Includes:

• Qty (2) Factory-matched 4015A Wide Cardioid microphones
• Qty (2) Foam windscreens
• Qty (2) Mic clips
• Qty (1) Peli carrying case

DPA ST4015A Features:

• Matched Pair of 4015A Mics
• Wide pickup area and natural sound
• Ambiance pickup with some directionality
• Matched within ±1 dB
• Peli Case transportation and protection

DPA ST4015A Specifications:

• Cartridge Type: Pre-polarized condenser
• Directional Pattern: Wide Cardioid
• Frequency Response: 20Hz – 20kHz
• Effective Frequency Range, ±2dB at 60cm (23.6”): 40Hz – 20kHz
• Max. SPL, THD 10%: 159dB peak
• Sensitivity, nominal, ±2dB at 1kHz: 10 mV/Pa; -40dB re. 1 V/Pa
• Distortion, THD< 1%: 136dB SOL RMS, 139dB SPL peak
• Equivalent Noise Level:
  • A-Weighted: Typ. 18dBA re. 20µPa (max. 20dBA)
  • ITU-R BS.468-4: Typ. 25dB (max. 27dB)
• Dynamic Range: Typ. 121dB
• Switchable Attenuator: 0dB / -20dB
• Rated Output Impedance: 200 Ω
• Minimum Load Impedance: 2k Ω
• Power Supply (for full performance): P48 (Phantom power)
• Current Consumption: 2.8mA
• Connector: XLR 3-pin male
• Microphone Diameter: 0.75” (19mm)
• Capsule Diameter: 0.75” (19mm)
• Microphone Length: 6.7” (170mm)
• Weight: 5.6 oz. (158 g)
• Color: Matte black
• Matching Tolerance: ±1dB (frequency response and sensitivity)