Product Overview
The DPA 4098 Gooseneck mic has a highly directional supercardioid pick-up pattern for outstanding rejection of off-axis noise. Its outstanding audio quality, sleek Scandinavian design, and high RF frequency rejection have made it a leading choice for podium mic and conference room use.
Features
- 4098 miniature supercardioid capsule
- Clear, transparent, natural sound even at high SPLs
- 8-inch (20cm) boom with flexible full gooseneck
- XLR-3M connector
- Foam windscreen included
- Black finish
Specifications
- Directional pattern: Supercardioid
- Principle of operation: Pressure gradient
- Cartridge type: Pre-polarized condenser
- Frequency response: 20 Hz - 20 kHz
- Effective frequency range ±2 dB, at 20 cm (7.9 in): 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
- Sensitivity, nominal, ±3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
- Distortion, THD < 1%: 130 dB SPL RMS, 133 dB SPL peak
- Dynamic range: Typ. 110 dB
- Max. SPL, THD 10%: 135 dB SPL peak
- Rated output impedance: 100 Ω
- Minimum load impedance: 2 kΩ
- Cable drive capability: Up to 100 m (328 ft)
- Output balance principle: Signal balanced with XLR connector or DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance): P48 (Phantom Power)
- Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Connector: XLR-3M
- Color: Black
- Height/Weight: 20 cm (8 in)/75 g (2.6 oz)
- Microphone diameter: 5.7 mm (0.22 in)
- Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001-BC XLR adapter)
- Temperature range: -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH): Up to 90%