AMX NMX-DEC-N1222A SVSI Stand-alone Minimal Compression Video over IP Decoder

AMX NMX-DEC-N1222A SVSI Stand-Alone Minimal Compression Video Over IP Decoder

An affordable local AV over IP switching solution that utilizes off-the-shelf network switches, the NMX-DEC-N1222A is a perfect IP decoder for any low-latency application such as live in-room presentations in classrooms and conference rooms. It offers improved digital pixel reproduction and reduces latency to 10ms for gigabit links. Packetized video streams arrive instantly and remain visually lossless.

AMX NMX-DEC-N1222A Includes:

• AMX NMX-DEC-N1222A SVSI Stand-Alone Minimal Compression Video Over IP Decoder

AMX NMX-DEC-N1222A Features:

• 1 Frame Latency (same as HDBaseT)
• Output Scaling allows seamless switching from any source at any resolution, to any projector or display, while preserving video fidelity
• Power Over Ethernet (PoE)
• Minimal Proprietary Compression (MPC)
• Infrared (IR) emitter connection for control of low-cost IR-only displays
• Built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
• 2 RJ45 Network Ports (1 PoE)

AMX NMX-DEC-N1222A Specifications:

• Video
  • Digital Video Input: Network video over Ethernet via RJ45 ports
  • Video Output: HDMI, DVI-D (through adapter)
  • Formats: HDMI, DVI-D (through adapter), HDCP content protection support
  • Output Resolutions: Supports most common HD up to 1920x1200. (See website for all supported resolutions.)
• Audio
• Input Signal Types: Network video over Ethernet via RJ45
• Output Signal Types: Embedded audio on HDMI or DVI-D (through adapter); Ethernet standard SVSI audio stream or AES67 (user selectable)
• HDMI Audio Formats: 8ch PCM
• Analog Audio Format: Stereo 2-channel
• Digital-to-Analog Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder
• settings)
• Latency
  • Video Latency: 10 ms at 60 fps
  • Audio Latency: Standard SVSi audio stream = 17-msec (synched to video) ; AES67 =
  • Note: Video and audio latency values are the combined encode plus decode latency. Total latency from source to screen will also include any network latency; Scaling adds one frame of latency (17ms at 60fps).
• Ethernet
  • P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, PoE, full/half duplex, DHCP, Auto IP, and Static IP
  • P1: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
  • HDMI: HDCP, EDID Management
• PORTS
  • +12V 2A: One 12 Volt DC power input
  • P0: 8-wire RJ45 female; 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port with PoE; Provides network connection and power to the Encoders
  • and Decoders.
  • P1: 8-wire RJ45 female; 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  • IR: 2-pin terminal Phoenix connector; Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included).
  • RS232: 3-pin terminal Phoenix connector; Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate.
  • AUDIO: 5-pin terminal Phoenix connector; Provides user-selectable balanced/unbalanced output; Dedicated audio output.
  • HDMI OUT: HDMI video output
• Controls and Indicators - Front Panel
  • RESET: button Recessed pushbutton; Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
  • ID button: Recessed pushbutton; Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command).
  • POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply); This activity is also shown by the PWR LED on the rear panel.
  • STATUS LED: On flashing (green) when there is software activity; This activity is also shown by the STAT LED on the rear panel.
• Controls and Indicators - Rear Panel
  • PWR LED: Same as POWER LED described above.
  • HDMI LED: On (green) when there is a connection to a valid video source.
  • STAT LED: Same as STATUS LED described above.
  • STRM LED: On (green) when the unit is streaming video.
• Power Supply, External, Not Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; not included in shipment. NMX-ACC-N9312 (FGN9312)
• Environmental
  • Temperature: 32° to 104°F (0° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)
  • Heat Dissipation: Up to ~44 BTU/Hr
• Dimensions (HWD): 1.05” x 7.888” x 5” (2.67 cm x 20.04 cm x 12.7 cm)
• Weight: 1.47 lbs (0.67 kg)