Saramonic SOUNDBIRDT3 Shotgun Microphone w/Li-Ion Battery, Shock Mount, Windscreen

The SoundBird T3 is a Professional shotgun mic that comes complete with a suite of accessories that allow you to capture broadcast-quality audio out of the box.

SoundBird's cardioid pattern provides strong rear and moderate side sound rejection to capture a focused, natural, open sound. All brass construction is extremely durable and helps to reduce radio frequency interference. The T3 can be powered by external phantom power if desired but it's fitted with an internal rechargeable battery that yields an amazing run-time of up to 150 hours!

Integrated controls let you configure the SoundBird so that it's adaptable to virtually any situation. A low-cut button tames unruly HVAC rumble, footsteps, or the idling truck in the alley. When you use the windscreen you may lose high frequency and intelligibility, not to worry, the high-boost control will remedy that. Plus, since all sources vary, Saramonic added a -10dB pad to reduce the level at input and stop distortion before it happens, just as it should be. Best of all, SoundBird saves the settings when the mic is power cycled.

The T3 comes with an SR-SMC2 shock mount, dedicated stand mount, foam windscreen, micro USB charging cable, XLR cable, zippered pouch, and a hardshell case to carry it all.

The Saramonic SoundBird T3, ready for anything.

Saramonic SOUNDBIRDT3 Includes:

• 1 x SoundBird T3 Shotgun Microphone
• 1 x SR-SMC2 Premium Adjustable Shock Mount
• 1 x Mic Clip Stand Mount
• 1 x Hard-Shell Travel Case
• 1 x Microphone Storage Pouch
• 1 x Foam Windscreen
• 1 x 2’ (61cm) Female to Male XLR Cable
• 1 x MicroUSB to USB-A Charging Cable
• 1 x Reusable Cable Strap
• 1 x User Manual
• 1 x Warranty Card

Saramonic SOUNDBIRDT3 Features:

• An advanced professional shotgun microphone with multiple filters that delivers clear, broadcast-quality sound and includes an array of useful accessories with a hard travel case
• Built-in illuminated buttons: Low-Cut filter removes unwanted rumble sounds, High-Boost adds high frequencies that are lost with wind protection and increases vocal intelligibility, -10dB Pad captures loud sounds
• Powered by internal rechargeable Li-Ion battery with 150-hour run-time or with external phantom power, illuminated On/Off button changes color based on power source and battery level
• Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer
• Includes a premium shock mount to attach to cameras or boom poles, a dedicated stand mount, storage pouch, foam windscreen, 2-foot (61cm) XLR output cable, hard travel case and more

Saramonic SOUNDBIRDT3 Specifications:

• Polar Pattern: Cardioid
• Frequency Range: 75Hz to 20kHz
• Sensitivity: -38 ± 3dB (0dB-1V/Pa, at 1kHz 1.5V 2.2K)
• Output Impedance: 150ohm
• Dynamic Range: 125dB (per IEC651)
• Maximum SPL: f=1kHz, THD
• Signal-to-Noise Ratio: 80dB SPL (per IEC651)
• High-Pass Filter: 150Hz
• Pad: -10dB
• High Frequency Boost: +6dB
• Material: Brass
• Power Requirements: 48V Phantom Power or Built-in Lithium Battery
• Battery Life: 150 Hours
• Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground)
• Diameter: 0.86” (2.2cm)
• Length: 11.1” (28.2cm)
• Weight: 8.48oz (240.5g)