Hollyland Lark 150 Duo Clip-on Wireless Microphone System

Hollyland HL-LARK-150 Lark 150 Clip-on Wireless Microphone System

A compact, one or two-person clip-on wireless mic system that is perfect for vlogging, YouTube presentations, live streaming, and other digital content creation.

The Lark 150 provides stable wireless audio transmission up to 100 meters with less than 5ms latency. The ultra-compact transmitters (37x37x17.5mm, 21g) clip to any collar easily and have built-in, highly sensitive omnidirectional microphones with an anti-vibration chamber to cancel noise for the best possible recording quality. Two omnidirectional lavalier microphones are also included which can be connected to the transmitter’s 3.5mm input jack for more recording options.

Three audio modes are selectable to suit different applications: Mono, stereo, and safety track. Safety track records in dual-channel to allow post-processing for elimination of pops on any one mic.

Both the transmitters and receiver have mute buttons for control of your audio. The included carry case is also a charging station and pairing box.

Hollyland LARK 150 Includes:

• (1) Charging Case
• (2) Transmitter
• (1) Receiver
• (2) Lavalier Microphone
• (2) Furry Windshield
• (1) 3.5mm TRS Patch Cable
• (1) 3.5mm TRS to TRRS Patch Cable
• (1) USB Type-A to Type-C Cable
• (1) User Guide
• (1) Storage Bag

Hollyland LARK 150 Specifications:

• Interfaces:
  • Transmitter/Mic: 3.5mm audio input, charging/upgrading contacts
  • Receiver: 3.5mm TRS output jack, 3.5mm headset jack, charging/upgrading contacts
  • Charging Case: USB Type-C jack
• Built-in Mic: Omnidirectional polar pattern, frequency response 20Hz – 20kHz
• Lavalier Mic: Omnidirectional polar pattern, frequency response 20Hz – 20kHz
• Reference Audio Input Level: -65dBV
• Maximum SPL: 100dB (1kHz @ 1m)
• Frequency Bandwidth: 2.4GHz AFH
• Dynamic Range: 100dBA
• Audio Output Level Change Rate: 21-state: 45dB
• Transmission Latency:
• Battery Mode:
  • Transmitter: 200mAh (0.76Wh)
  • Receiver: 530mAh (1.96Wh)
  • Charging Case: 3500mAh (12.7Wh)
• Battery Life:
  • Transmitter: Approx. 4 hours
  • Receiver: Approx. 7.5 hours
  • Charging Case: Can charge 2 TX and 1 RX at same time to full charge about 2.5 times
• Charging Time:
  • Transmitter: Approx. 45 minutes
  • Receiver: Approx. 65 minutes
  • Charging Case: Approx. 2.5 hours
• Firmware Upgrade Method: PC
• Dimensions/Weight:
  • Transmitter: 37mm x 37mm x 17.5mm, 20.5g
  • Receiver: 67mm x 41mm x 20.5mm, 51g
  • Charging Case: 121mm x 61mm x 43.5mm, 227.5g