Product Overview
The Blonder Tongue AMCM-860DS is a modular agile stereo A/V modulator. Essentially the unit operates like an auto volume control or compressor that mantains a consistent volume between programs and commercials. The AMCM-860DS is intended for use on stereo broadcast material and is available in NTSC channels 2-135 (54-860 MHz).
Blonder-Tongue AMCM-860DS Features:
- Audio AGC feature prohibits commercials that accompany broadcast programs from
- (i) having modulation levels substantially higher than the broadcast program; and
- (ii) having an average maximum loudness substantially higher than that of the broadcast program.
- Audio AGC feature provides consistent audio level among all broadcast programs on different channels and among
- different programs within the same channel
- Compact design allows for deployment of 12 channels in 2RU
- Utilizes SAW filters for improved performance
- Die-cast chassis for RFI immunity
Blonder-Tongue AMCM-860DS Specifications:
- Video
- Connector: “F” Female
- Impedance: 75 Ω
- Return Loss: 24 dB
- Input Level: 1.0 volt peak-to-peak (87.5% depth of modulation)
- Frequency Response: 1.0 dB peak-to-valley (fv to fv+4.2 MHz)
- Peak-to-Peak Video-to-RMS Hum Ratio: 65 dB
- Signal-to-Noise Ratio: 62 dB (Weighted; 4 MHz bandwidth)
- Differential Gain: 2.0% (87.5% depth of modulation)
- Differential Phase: 1.0 degree (87.5% depth of modulation)
- Chrominance/Luminance Delay: Per FCC Requirements
- Mono Audio(standard)
- Connector: RCA
- Input Impedance: Greater than 10 kΩ, unbalanced
- Input Level:(for 25 KHz deviation) 0.5 - 4.0 volt peak-to-peak (constant AGC range)
- Frequency Range: 50 Hz to 15 kHz
- Frequency Response: ± 1 dB
- Total Harmonic Distortion: 1% @ 25 kHz deviation
- Signal-to-Noise Ratio: 66 dB
- Stereo Audio (optional)
- Connector: RCA
- Input Impedance: Greater than 10 kΩ, unbalanced
- Input Sensitivity: (for 55 kHz peak deviation) 0.5 - 4.0 volt peak-to-peak (AGC range with pilot tone)
- Frequency Response: ± 0.75 dB (50 Hz to 12 kHz)
- Separation: 20 dB @ 50 Hz to 10 kHz
- Output
- Connector: “F” Female
- Impedance: 75 Ω
- Return Loss: 12 dB
- Frequency Range: 54 to 860 MHz (NTSC CATV Ch. 2 -135)
- Power Level: +45 dBmV
- Power Level Range: 10 dB continuously adjustable
- Carrier-to-Noise:(In Channel): 63 dB
- Broadband Noise: -75 dBc (@ +45 dBmV output level, 4 MHz bandwidth)
- Spurious Outputs: -60 dBc
- Aural/Visual Carrier Ratio: -11 to -19 dB continuously adjustable
- 4.5 MHz Aural Inter-carrier Freq. Tolerance: ±150 Hz; 77 °F (25 °C)
- Visual Carrier Frequency Tolerance
- Standard Channels: ±10 kHz; 32 to 122 °F (0 to 50 °C)
- FCC Aeronautical Channels: ±5 kHz; 32 to 122 °F (0 to 50 °C)