Product Overview
Designed to encode H.264 compressed video for distribution on a WAN (Wide Area Network), the NMX-ENC-N3132-C H.264 Compressed Video over IP encoder card gives you an option for low bit rate distribution of 1080p60 content. Ideal for use with video to desktop or third-party hardware endpoints like Roku, Amino, or Google TV.
Paired with N3000 series decoders (sold separately), the NMX-ENC-N3132-C creates a system that makes storing and accessing video from the cloud a cost effective logical solution.
The NMX-ENC-N3132-C supports PoE on one of its two RJ45 network ports, eliminating the need for an external power supply. Designed for use with the six-slot NMX-ACC-N9206 2U rack mount cage, the card can also be powered via the rack cage. The N3132-C encoder card also features a separate HDMI output and has a separate SFP port that allows visually lossless video to be routed on a fiber-only network to extend signals beyond the reach of category cable.
The card also includes IR, serial, balanced audio, and an analog VGA video input.
AMX NMX-ENC-N3132-C Applications:
Distance learning
Multi-site enterprise
IPTV streaming
Digital signage
AMX NMX-ENC-N3132-C Includes:
- NMX-ENC-N3132-C Encoder Card
AMX NMX-ENC-N3132-C Features:
- Power Over Ethernet (PoE) — Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
- Infrared (IR) — Infrared emitter connection allows control of low-cost, IR-only display devices
- Onboard Control — All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Unlimited Scalability
- Pass-Through HDMI — HDMI interface allows easy installation with local display such as desktop PC applications
- Stand Alone or Card — Available as a stand alone device, or card for use with NMX-ACC-N9206
AMX NMX-ENC-N3132-C Specifications:
- Video
- Digital Video Input:
- HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA
- DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Analog Video Input:
- HD-15 VGA, Component
- Component is supported through a passive adapter
- Video Output:
- Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D
- DVI-D is supported through a passive adapter
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support, RGBHV, YPbPr
- Progressive Input Resolutions: Supports most common HD up to 1080p60.
- 640x480 @ 60Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz
- Supported in component mode: 720x480 @ 59Hz, 720x480 @ 60Hz, 720x576 @ 50Hz, 1280x720 @ 50Hz, 1280x720 @ 59Hz, 1280x720 @ 60Hz, 1920x1080 @ 50Hz, 1920x1080 @ 59Hz, 1920x1080 @ 60Hz, 1920x1080i @ 50Hz, 1920x1080i @ 59Hz, 1920x1080i @ 60Hz
- Interlaced Input Resolutions: Supports 1080i60.
- 640x480 @ 60Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz
- Supported in component mode: 720x480 @ 59Hz, 720x480 @ 60Hz, 720x576 @ 50Hz, 1280x720 @ 50Hz, 1280x720 @ 59Hz, 1280x720 @ 60Hz, 1920x1080 @ 50Hz, 1920x1080 @ 59Hz, 1920x1080 @ 60Hz, 1920x1080i @ 50Hz, 1920x1080i @ 59Hz, 1920x1080i @ 60Hz
- Analog Input Resolutions: Supports most common HD up to 1080p60. (Input resolutions supported @60Hz refresh rates are also supported @59.94Hz)
- 640x480 @ 60Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz
- Supported in component mode: 720x480 @ 59Hz, 720x480 @ 60Hz, 720x576 @ 50Hz, 1280x720 @ 50Hz, 1280x720 @ 59Hz, 1280x720 @ 60Hz, 1920x1080 @ 50Hz, 1920x1080 @ 59Hz, 1920x1080 @ 60Hz, 1920x1080i @ 50Hz, 1920x1080i @ 59Hz, 1920x1080i @ 60Hz
- Output Resolutions: Matched to inputs
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
- The N3132 Encoder does not accept Composite or SVideo (YC)
- Audio
- Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
- Output Signal Types:
- Ethernet, Embedded audio on HDMI or DVI-D (through adapter)
- HDMI output refers to pass-through video on the HDMI OUT port
- HDMI Audio Formats: Stereo 2-channel
- Analog Audio Formats: Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
- NOTE: HDMI output refers to pass-through video on the HDMI OUT port.
- Latency
- Latency: 175 ms at 60 fps
- Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
- Note: Scaling adds one frame of latency (17ms at 60fps)
- Communications
- Ethernet
- P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
- HDMI: HDCP, EDID management
- Ports
- +12V 2A: One 12 Volt DC power input.
- P0
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- P1
- SFP port (SFP fiber transceiver or direct attach cable not included)
- Provides the network connection and network AV video
- IR
- 2-pin terminal Phoenix connector
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232
- 3-pin terminal Phoenix connector
- Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate
- AUDIO
- 5-pin terminal Phoenix connector
- Provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI OUT: HDMI video output (passive pass-through from HDMI IN)
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB connector (front panel): One USB-A control input
- Controls and Indicators - Front Panel
- RESET Button
- Recessed pushbutton
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
- Recessed pushbutton
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
- Controls and Indicators - Rear Panel
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
- Environmental
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/Hr
- General
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-
- Series Card Units
- FG Numbers: FGN3132-CD
