Tannoy CMS-603ICT-LS 6" Full Range Ceiling Loudspeaker with ICT Driver

The CMS 603ICT LS represents a cutting-edge wide bandwidth loudspeaker with an impressive power output of 240 Watts. It incorporates our latest third-generation Ceiling Monitor System technology (CMS 3.0) and holds UL certification for non-DC supervised system compatibility. This advanced loudspeaker features an innovative proprietary 6" ICT (Inductive Coupling Technology) point source driver, specifically designed to deliver a remarkable extended frequency range. As a result, the CMS 603ICT LS ensures consistent broadband directivity while enhancing intelligibility for optimal audio performance. The ICT driver employed in this loudspeaker guarantees exceptional long-term reliability, making it an excellent choice for applications requiring continuous usage. The CMS 603ICT LS stands as a remarkable solution for demanding installations that require outstanding audio quality and durability.

Tannoy CMS-603ICT-LS Features:

• Optimised for Installation
• LAB GRUPPEN Ready

Tannoy CMS-603ICT-LS Specifications:

• Frequency response (-3 dB) (1): 78 Hz - 22 kHz
• Frequency range (-10 dB) (1): 51 Hz - 24 kHz
• System sensitivity (1 W @ 1 m) (2): 91 dB (1 W = 4 V for 16 Ohms)
• Nominal Coverage Angle: 90 degrees conical
• Coverage Angle (1 kHz to 6 kHz): 92 degrees
• Directivity Factor (Q): 7.1 averaged 1 kHz to 6 kHz
• Directivity Index (DI): 7.9 averaged 1 kHz to 6 kHz
• Power Handling (3)
• Recommended Amplifier Power: 120 W @ 16 Ohms
• Nominal Impedance (Lo, Z): 16 Ohms
• Rated maximum SPL: Transformer Taps (via front rotary switch)
• Crossover: 7 kHz inductively coupled
• Transducers:
• Low Frequency: 165 mm (6.50") mineral loaded polypropylene
• High Frequency: ICT aluminium dome
• Physical:
• Enclosure: Safety Features, Safety ring located at rear of enclosure for load bearing safety bond
• CMS 603ICT LS: UL 1480 UUMW certification for Life Safety applications
• Clamping Design: Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36")
• Recommended clamp torque: 1.5 Nm
• Backcan Options: Complete with fixed backcan
• Cable Entry Options: Cable clamp & squeeze connector for conduit up to 22 mm
• Conduit Knockouts on PI Backcan: 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75" / 0.87" / 1.10")
• Connectors: Removable locking connector with screw terminals with “loop through” facility
• Compliance: UL-1480, UL-2043, CE
• Dimensions: Hole cutout diameter (all models): 253 mm (9.96")
• Net Weight (ea): 5.4 kg (11.9 lbs)
• Included Accessories: C-Ring, tile-bridge kit, paint mask, cut-out template, grille
• Optional Accessories: Plaster (mud) ring, Arco grille
• Packed Quantity: 2