Enttec D-Split Optical Splitter/Isolator with (2) 3-Pin and (2) 5-Pin Outputs

Enttec 70578 Optical Splitter/Isolator with Two 3-Pin, Two 5-Pin Outputs

Simple and flexible DMX distribution.

The D-Split from Enttec is an optically isolated DMX splitter and repeater for distribution of DMX512 signals. It features one DMX input and four isolated output ports that can each be used to create a new chain of up to 32 DMX fixtures. Rather than making all fixtures fit into one daisy chain, each of the four D-Split outputs can be the start of its own chain and multiple D-Splits can be linked together to further increase flexibility.

The 70578 model features one input channel with linked 3-pin and 5-pin DMX input connectors, plus four DMX output channels (two 3-pin and two 5-pin).

Enttec D-Split Includes:

• D-Split (with 3-pin & 5-pin outputs)
• Universal power supply
• TS35 DIN clip with 2x mounting screws

Enttec D-Split Features:

• A small but powerful solution for extending your DMX chain. The unit is ANSI E1.11 – USITT DMX512-A compatible and each D-Split repeats and re-buffers all 512 DMX channels from the input on each output
• 1000V optical isolation on each port to protect your system from stray voltages. A great way to add an extra layer of protection for your gear while adding flexibility to your DMX wiring scheme
• Easily configure multiple DMX chains with multiple D-Splits. Each of the four outputs on every D-Split can be the start of its own chain
• Integrated mounting points for attaching an optional included TS35 DIN rail clip allow installation in cabinets or on surfaces with a DIN rail fitted
• Wide voltage range of 7-24VDC. Though each D-Split comes with its own universal power supply, you can share a single, larger supply between all of your units, if needed

Enttec D-Split Specifications:

• Connectors:
  • Input: 1x 5-pin DMX, 1x 3-pin DMX (only one input signal is allowed)
  • Output: 2x 3-pin DMX, 2x 5-pin DMX
• LED Indicators: Power, Data input
• Input/Output Protocol: USITT DMX512-1990
• Max. Channel: 512 channels (1 Universe)
• RDM Compatibility: No
• Input Voltage: 7-24VDC
• Max. Current: 400mA
• IP Rating: IP20
• Case Material: ABS plastic
• Dimensions: 4.6” wide x 3.4” deep x 2.0” high (116.4 x 87.4 x 51.9 mm)
• Weight: 0.35 lb. (0.5 kg)
• Operating Temperature: 0° to 50° C (32° to 122° F)
• Humidity: 5-95% non-condensing