Product Overview
Kramer's KDS-8 zero latency 4K HDR SDVoE (Video over Ethernet) streaming transceiver supports video up to 4K@60Hz (4:4:4) for operation over standard copper Ethernet cable. The KDS-8 encodes HDMI signal input for streaming over a local network and features an analog audio port allowing you to embed audio into the stream. It can also be used as a decoder to output the signal to a connected display via standard HDMI cabling. The KDS-8 also passes bi-directional InfraRed Remote and RS232 control data along with the video stream.
Kramer KDS-8 Features:
- User configured as encoder or decoder
- Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface providing lossless compression
- Fully standard and compliant SDVoE codec.
- Streaming Support — Multicast, Unicast.
- Powered by the network (PoE)
- Video wall and multiview support
- Managed by KDS-8-MNGR
- HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support
Kramer KDS-8 Specifications:
- Inputs
- 1 HDMI: On a female HDMI connector
- 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
- Outputs
- 1 HDMI: On a female HDMI connector
- 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
- Ports
- 1 10GbE Ethernet: On an R–J45 connector
- 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
- 1 1GbE Ethernet: On an R–J45 connector
- 1 RS-232: On a 3–pin terminal block connector
- Video
- Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
- Extension Line
- Signal Compression: Ultra–light compression, lossless for most content
- Range: Up to 100m in point–to–point mode
- Audio
- Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates
- Power
- Source: 12V DC
- Consumption: 3A
- PoE Budget: 25W (not including cable loss)
- Environmental Conditions
- Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
- Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
- Humidity: 10% to 90%, non–condensing
- Product Dimensions: 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H
- Product Weight: 0.5kg (1.1lbs) approx.
- Shipping Dimensions: 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
- Shipping Weight: 1.2kg (2.6lbs) approx.
