Sennheiser XSW IEM EK A In-Ear Monitoring Bodypack to Expand XS Wireless IEM Setup

The Sennheiser XSW-IEM-EK-A is a lightweight in-ear monitoring bodypack. It is a part of the XS Wireless IEM series. With XS Wireless IEM system, you can simply link additional receivers to one transmitter. The lightweight bodypack is unobtrusive once clipped on your clothing or belt.

The included IE 4 headphones or other in-ear monitors can be used with the 3.5 mm output. The LED status shows battery and link status at a quick glance. The front panel allows for individual fine-tuning, from balance to focus modes to EQ to Limiter, to customize your individual mix

Sennheiser XSW IEM EK A Includes:

• XSW IEM EK Stereo Receiver
• IE 4 In-ear headphones
• 2 AA batteries
• Quick Guide
• Safety Guide
• Compliance Sheet
• Frequency Table

Sennheiser XSW IEM EK A Features:

• UHF bodypack receiver to expand existing XS Wireless
• A lightweight bodypack with rear clamp and stage-proof
• Standard 3.5 mm jack plug for included IE 4 headphones or any 3.5 mm in-ear sets
• Backlit front panel and status LED for battery and link
• Menu access to receiver sound settings like focus modes, volume control, limiter, and EQ
• Pan control for individual balance of input channels
• Powered by 2 AA batteries or rechargeable batteries

Sennheiser XSW IEM EK A Specifications:

• RF characteristics
  • Modulation: Wideband FM
  • Frequency ranges:
  • Switching bandwidth: up to 24 MHz
  • Nominal/peak deviation: ±15 kHz / ±24 kHz
  • Squelch: 10 μV, fixed
• AF characteristics:
  • Signal-to-noise ratio (1 mV, peak deviation): ≥88 dB
  • Total harmonic distortion (THD): ≤ 1 %
  • AF output level at 3.5 mm 2 x 1,25 Veff at 16 Ω
  • High Boost (EQ) +10 dB at 13 kHz
  • Limiter: -10 dB
  • AF frequency response: 45 Hz to 15 kHz
  • Cross talk (50 Hz - 10 kHz): typically 45 dB
• Overall device:
  • Temperature range: 0 °C to +40 °C
  • Power supply: 2 AA batteries, 1.5 V
  • Nominal voltage: 3 V battery
  • Operating time: Approx. 6 hrs (depending on volume level)
  • Dimensions: Approx. 95 x 70 x 26 mm
• E4 - In-ear headphones:
  • Transducer: dynamic
  • Frequency response: 40-20.000 Hz
  • SPL: (1 kHz, 1 mW) 106 dB
  • Nominal impedance: 6 Ω
  • Cable length: 1.4 m
  • Connector: 3.5 mm (1/8") stereo plug, gold-plated
  • Temperature: 23 °F to 122 °F
  • Weight (incl. batteries): Approx. 110 g