DPA 4266-OC-F-B03-LH 4266 CORE Omni Flex Headset Mic, 110mm Boom,Black,3-pin LEMO

The 4266-OC-F-B03-LH omnidirectional headset microphone provides accurate, natural-sounding voice capture of speakers or performers with an active delivery style. The 4266-OC-F-B03-LH is a black omnidirectional dual ear headset mic with a 110mm boom and a cable that terminates in a fixed 3-pin LEMO connector. The comfortable headset is easy to put on, visually discrete and offers the adjustability to fit any user. The omnidirectional microphone captures sound equally from all angles making boom placement less critical. A rotating boom and ear hooks allow the 4266-OC-F-B03-LH to be worn on the left or right side for maximum versatility. The cover and housing of the element feature a water-repellant nano-coating, and the mic's internal amplifier is hermetically sealed, resulting in an IP58 dust/water ingress rating to ensure years of dependable use.

DPA Features:

• Pristine audio quality
• Lightweight and flexible
• Easy mounting to the left or right
• Minimal visual impact
• Resistant to humidity

DPA Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB: Soft boost grid: 40 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 40 Hz - 20 kHz, 10 dB boost at 12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
• Distortion, THD < 1% - CORE: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range - Legacy: Typ. 97 dB
• Dynamic range - CORE: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: 3-pin LEMO
• Color: Black
• Weight: Single Ear: 10 g (0.35 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 12.7 mm (0.5 in)
• Cable length: 1.3 m (4.3 ft)
• Cable color: Black
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH):Up to 90%