Product Overview
Introducing the Crestron HD-RX-4K-210-C-E, a versatile multiformat AV switch and receiver designed to elevate your audiovisual experience in conference rooms, classrooms, and other professional settings. With its advanced features and seamless integration, this device empowers you to deliver impactful presentations and create engaging collaborative environments.
Equipped with HDMI® video switching capabilities, the HD-RX-4K-210-C-E enables effortless control and distribution of high-quality video content. Whether it's displaying multimedia presentations, sharing documents, or streaming videos, this receiver ensures smooth and reliable performance for your AV needs.
The HD-RX-4K-210-C-E is compatible with all DM Lite® transmitters, allowing you to connect one transmitter via its dedicated DM Lite input. This flexibility enables easy connectivity and integration with various sources, providing you with the freedom to customize your AV setup according to your specific requirements.
With its sleek design and compact form factor, the HD-RX-4K-210-C-E seamlessly blends into any environment, making it an ideal choice for modern conference rooms and classrooms. Its user-friendly interface and intuitive controls simplify operation, allowing presenters and educators to focus on delivering their content effectively.
Crestron HD-RX-4K-210-C-E Features:
- 4K/60 4:2:0 capability
- One DM Lite® port for interoperability with one DM Lite transmitter
- One HDMI® input
- One HDMI output with 4K scaler
- Gigabit Ethernet port
- Stereo line level audio output
- IR, RS-232, relay, and I/O control ports
- CEC (Consumer Electronics Control) capability
- Automatic switching of inputs
- EDID management
- HDCP management including HDCP 2.2 support
- Built-in web interface for easy configuration and monitoring
- Compatibility with Crestron® 3-Series® or later control systems
- .AV Framework™ technology support
- XiO Cloud® service support
- Native integration with Cisco Webex® and Touch 10 devices
- 100-240 VAC power pack included
- Compact surface-mount design
Crestron HD-RX-4K-210-C-E Specifications:
- Video:
- Switcher: 2x1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
- Scaler (HDMI Output): 4K video scaler with intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
- Input Signal Types: HDMI with Deep Color and 4K (DVI and Dual Mode DisplayPort™ interface compatible2) on Input 1, DM Lite with Deep Color and 4K on Input 2
- Output Signal Types: HDMI with Deep Color and 4K (DVI compatible3)
- Copy Protection: HDCP 2.2
- Scaler Output Resolutions: HDMI
- Auto (EDID preferred), 1280x720p@50Hz (720p50), 1280x720p@60Hz (720p60), 1920x1080i@25Hz (1080i25), 1920x1080i@30Hz (1080i30), 1920x1080p@30Hz (1080p30), 1920x1080p@25Hz (1080p25), 1920x1080p@24Hz (1080p24), 1920x1080p@50Hz (1080p50), 1920x1080p@60Hz (1080p60), 3840x2160p@24Hz, 3840x2160p@25Hz, 3840x2160p@30Hz, 4096x2160p@24Hz, 4096x2160p@25Hz, 4096x2160p@30Hz, 3840x2160p@50Hz, 3840x2160p@60Hz, 4096x2160p@50Hz, 4096x2160p@60Hz
- Audio:
- Input Signal Types: HDMI (Dual-Mode DisplayPort compatible2), DM Lite
- Output Signal Types: HDMI, stereo analog
- Digital Formats: 2-channel LPCM
- Analog Formats: Stereo 2-channel
- Digital-to-Analog Conversion: 24-bit 48 kHz
- Output Impedance: 200 ohms balanced, 100 ohms unbalanced
- Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
- Output Volume: -80 to +20 dB level adjustment range plus Mute
- Mute: Enable or disable independently for HDMI and analog audio output
- Analog Output Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB
- S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted
- THD+N:
- Stereo Separation: 20 Hz to 20 kHz ≤80 dB
- Acoustic Noise: Not applicable (fanless)
- Communications:
- Ethernet: 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control
- RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
- IR: 1-way device control via infrared up to 60 kHz
- HDMI: HDCP 2.2, EDID, CEC
- DM Lite: HDCP 2.2, EDID
- Connectors:
- HDMI INPUT 1: (1) HDMI Type A connector, female;
- HDMI digital video/audio input;
- DVI and Dual-Mode DisplayPort interface compatible2
- DM Lite INPUT 2: (1) 8-pin RJ-45 yellow connector, female, shielded;
- DM Lite input port for connection to a DM Lite transmitter
- HDMI OUTPUT: (1) HDMI Type A connector, female;
- HDMI digital video/audio output;
- DVI compatible3
- NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
- AUDIO L/R: (1) 5-pin 3.5 mm detachable terminal block;
- Balanced/unbalanced stereo line-level audio output;
- Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
- Output Impedance: 200 ohms balanced, 100 ohms unbalanced
- Ethernet: (1) 8-pin RJ-45 connector, female;
- 100BASE-TX/1000BASE-T Ethernet port
- I/O 1-2: (2) 2-pin detachable terminal blocks;
- Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND);
- Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and
- Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
- Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled;
- Programmable 5 V, 2k ohms pull-up resistor per pin
- RELAY 1-2: (2) 2-pin detachable terminal blocks;
- Comprised of 2 normally open, isolated relays;
- Rated 1 A, 30 VAC/VDC;
- MOV arc suppression across contacts
- IR: (1) 2-pin 3.5 mm detachable terminal block;
- IR output control port; supports IR up to 60 kHz;
- IRP2 emitter sold separately
- NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.
- COM: (1) 5-pin 3.5 mm detachable terminal block;
- Bidirectional RS-232 port;
- Supports RS-232 up to 115.2k baud with hardware and software handshaking
- NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
- 24V 1.25A: (1) 2.1 x 5.5 mm DC power connector;
- 24 VDC power input;
- PW-2412WU power pack included
- NOTE: The power pack powers both the HD-RX-4K-210-C-E and the connected DM Lite transmitter. A power pack must not be connected to both devices simultaneously. When paired with a 4K60 4:4:4 (4KZ) transmitter, power must be connected to the HD-RX-4K-210-C-E only.
- SERVICE: (1) USB Type A connector, female;
- For factory use only
- Controls and Indicators
- PWR: (1) LED, indicates that power is being applied to the HD‑RX‑4K-210-C-E from the power pack connected to either the HD‑RX‑4K-210-C-E or the transmitter. Amber indicates that the HD‑RX‑4K-210-C-E is booting. Green indicates that the HD‑RX‑4K-210-C-E is operational.
- INPUT 1-2: (2) Push buttons for manual input selection and (2) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched.
- AUTO: (1) Push button to enable or disable automatic switching, and (1) green LED to indicate that automatic switching is enabled
- SETUP: (1) Red LED and (1) push button for display of IP address on the HDMI output
- DM Lite: (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video and solid amber indicates HDCP video.
- Ethernet: (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity.
- Power:
- Power Pack (Included):
- Input: 100-240 VAC, 50/60 Hz
- Output: 1.25 A @ 24 VDC
- Model: PW-2412WU
- NOTE: The power pack powers both the HD-RX-4K-210-C-E and the connected DM Lite transmitter. A power pack must not be connected to both devices simultaneously..
- Power Consumption: 9 W typical
- Environmental:
- Temperature: 32° to 104° F (0° to 40° C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: 30.7 BTU/hr
- Enclosure:
- Chassis: Metal, black finish, vented sides, 2 mounting flanges attached
- Mounting: Surface or rack rail mount
- Dimensions:
- Height: 5.11 in. (130 mm)
- Width: 10.53 in. (268 mm) with mounting flanges attached
- Depth: 1.10 in. (28 mm)
- Weight: 2.3 lb (1.05 kg) with mounting flanges attached
- Compliance:
- Regulatory Model: M1845001
- UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
