Product Overview
Martin's ERA 150 Wash is a high-intensity moving head LED wash fixture. It features wide zoom range, uniform wash field, and full-gamut color calibration with an extended color mode and a CTC channel that can modify RGB channels.
Martin Pro ERA 150 Wash Applications:
Theatre Productions
Live Concerts/Events
Exhibitions
Corporate events
Rentals
Installs
Touring Companies
Martin Pro ERA 150 Wash Includes:
- ERA 150 Wash
- Safety and Installation Manual
- Martin Omega bracket for rigging clamp attachment (P/N 91602001)
Martin Pro ERA 150 Wash Features:
- Light engine: LED 7 x 40W RGBW
- Full-gamut color calibration
- CTC control: 1,800–10,000 K
- High output: 3,900 lumens
- High intensity 373,000 cd
- Zoom: 4.2 - 58˚
- Low-noise cooling system
- High-speed pan/tilt & zoom
Martin Pro ERA 150 Wash Specifications:
- Dynamic Effects
- Color mixing: RGBW
- Color presets: 48 color presets, virtual color wheel effects
- Color temperature control: Variable 1,800 - 10,000 K
- Electronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic shutter effect: Instant open and blackout
- Zoom: Motorized, 4.2 - 58°
- Pan: 540°
- Tilt: 260°
- Control and Programming
- Control options: DMX, RDM
- DMX channels: 18
- 16-bit fine control: Dimming, RGB, zoom, pan and tilt
- LED color management modes: Raw, extended and calibrated
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Fixture software update: USB memory device or over DMX link
- Optics
- Light source: 7 x 40 W RGBW Osram LEDs
- Minimum LED lifetime: 50,000 hours (to > 70% luminous output)
- Beam angle (half-peak): 4.2° - 38.7°
- Field angle (one-tenth peak): 5.1° - 58.6°
- Cutoff angle (3%): 5.7° - 69.6°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Installation
- Mounting points: 2 x quarter‐turn fastener receptacles, 106.5 mm
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to combustible materials: 1.7' (0.5 m)
- Minimum distance to illuminated surfaces: 3.3' (1 m)
- Minimum clearance around fan and air vents: 1.7' (0.5 m)
- Connections
- AC power input/output: Neutrik PowerCON TRUE1 TOP
- DMX and RDM data in/out: Neutrik 5-pin locking XLR
- Electrical
- AC power: 100-240 VAC (nominal), 50/60 Hz
- Typical power consumption: 315 W
- Typical half-cycle RMS inrush current at 240 VAC: 8.7 A
- Power supply unit: Auto-ranging electronic switch mode
- Recommended Miniature Circuit Breaker: Type D
- Maximum Power and Current
- 100-120 V, 60 Hz : 3.8 A, 340 W, Power factor 0.993
- 220-240 V, 50 Hz: 1.5 A, 340 W, Power factor 0.966
- Thermal
- Cooling: Forced air (temperature regulated, low noise)
- Maximum ambient temperature (Ta max.): 104°F (40°C)
- Minimum ambient temperature (Ta min.): 14°F (-10°C)
- Total heat dissipation (calculated): 1195 BTU/hr
- Acoustic Data
- Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.0 dB(A)
- Approvals
- Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class B
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class B, ICES-005 Class B
- Australia/NZ: RCM
- United Kingdom: UKCA
- Physical
- Housing: High-impact flame-retardant thermoplastic
- Color: Black
- Protection rating: IP 20
- Dimensions: 10.9" x 7.0" x 14.1" (276 x 176 x 356 mm)
- Weight 16.1 lbs (7.3 kg)