Product Overview
Martin's ELP PAR is a versatile, high-intensity narrow zoom, static LED wash fixture. It features a quick-focus system, bright angle of projection indicators, a wide zoom range, and full-gamut color calibration with an extended color mode and a CTC channel that can modify RGB channels.
Note: The ELP-PAR does NOT include a power cord.
Martin Pro ELP PAR Applications:
Theatre productions
Festivals
Exhibitions
Corporate events
Martin Pro ELP PAR Includes:
- ELP PAR
- Adjustable mounting bracket
- Safety and Installation Manual
- Power cord is NOT included
Martin Pro ELP PAR Features:
- Light engine: 7 x 40W RGBW
- Full-gamut color-calibration system
- CTC control: 2,800–10,000 K
- Lumen output: 3,500
- Intensity: 390,000 cd
- Zoom: 4.2 - 58°
- Quick Focus mode allows installation and focusing without the need for a console operator
- Clear of projection indicators allow quick installation
- Angled power and data connections support a clean cable run that does not impede the fixture or installation
- Included truss and floor-mounting yoke with omega bracket connectivity
- Low-noise 33 dB Theatre mode operation
- IP20 rating
Martin Pro ELP PAR Specifications:
- Dynamic Effects
- Color mixing: RGBW
- Color presets: 48 color presets, virtual color wheel effects
- Color temperature control: Variable 1,800 – 10,000K
- Electronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic shutter effect: Instant open and blackout
- Zoom: Motorized
- Control and Programming
- Control options: DMX, RDM
- DMX channels: 14
- 16-bit fine control: Dimming, RGB, zoom
- LED color management modes: Raw, extended and calibrated
- DMX address setting: Control panel with OLED display
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: via DMX using Martin Companion
- Optics
- Light source: 7 x 40 W RGBW Osram LEDs
- Minimum LED lifetime: 50,000 hours (to > 70% luminous output)
- Beam angle (half-peak): 4.2° - 38.7°
- Field angle (one-tenth peak): 5.1° - 58.6°
- Cutoff angle (3%): 5.7° - 69.6°
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration
- Photometric Data
- Wide beam: 3525 lumens
- Narrow beam: 1445 lumens
- Fixture Center Intensity Narrow Beam: 390083 cd
- Fixture Center Intensity Wide beam: 9957 cd
- CRI (Color Rendering Index) : > 70
- CQS (Color Quality Scale): 83
- TM-30 Rf (IES TM-30-15 Fidelity Index): 77
- TM-30 Rg (IES TM-30-15 Gamut Index): 117
- TLCI (Television Lighting Consistency Index): 61
- CCT: 6500 Kelvin
- LED refresh rate - Standard Mode: 3600 Hz
- LED refresh rate - Theatre Mode: 19200 Hz
- Installation
- Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket)
- Location: Not for household use, indoor use in dry location only
- Orientation: Any
- Minimum distance to combustible materials: 1.7' (0.5 m)
- Minimum distance to illuminated surfaces: 3.3' (1 m)
- Minimum clearance around fan and air vents: 1.7' (0.5 m)
- Connections
- AC power input/output: Neutrik PowerCON TRUE1 TOP
- DMX and RDM data in/out: Neutrik 5-pin locking XLR
- Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Typical power consumption: 300 W
- Typical half-cycle RMS inrush current at 240 VAC: 8.7 A
- Power supply unit: Auto-ranging electronic switch mode
- Maximum Power and Current
- 100-120 V, 60 Hz : 3.0 A, 320 W, Power factor 0.991
- 220-240 V, 50 Hz: 1.7 A, 320 W, Power factor 0.941
- *Measurements made at nominal voltage with all LEDs at full intensity.
- Allow for a deviation of +/- 10%.
- Thermal
- Maximum surface temperature: 149°F (65°C)
- Cooling: Forced air (temperature regulated, low noise)
- Maximum ambient temperature (Ta max.): 104°F (40°C)
- Minimum ambient temperature (Ta min.): 14°F (-10°C)
- Total heat dissipation (calculated): 1170 BTU/hr
- Acoustic Data
- Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 37.1 dB(A)
- Sound Pressure Level (LpA) @ 1 m (constant fan mode low): 33.0 dB(A)
- Approvals
- Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class B
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class B, ICES-005 Class B
- Australia/NZ: RCM
- United Kingdom: UKCA
- Physical
- Housing: Aluminum and composite
- Filter mount: 7.5" x 7.5" (191 x 191 mm)
- Color: Black
- Protection rating: IP 20
- Dimensions (inc. bracket): 12.3" x 11.3" x 15.8" (312 x 287 x 401 mm)
- Weight: 17.2 lbs (7.8 kg)
